Re: [PATCH 01/12] iio: imu: inv_icm42600: add core of new inv_icm42600 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan,

thanks for the feedbacks, I'm sorry but I will not be able to have a correct email formatting to respond you inline.

No problem with all the comments. For iio_device_get_drvdata, it would make more sense to use a const struct iio_dev * as argument. I am obliged to do the pointer conversion since iio_get_mount_matrix requires the use of a const struct iio_dev *.

For resume/suspend, I will add commentaries to explain what it is really doing and for which purpose. Sensor states save and restore will remain in this patch, since it makes more sense to have it as a core functionnality, as much as gyro/accel turn on/off.

Thanks.
JB


From: linux-iio-owner@xxxxxxxxxxxxxxx <linux-iio-owner@xxxxxxxxxxxxxxx> on behalf of Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Sent: Friday, May 8, 2020 15:28

To: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>

Cc: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; robh+dt@xxxxxxxxxx <robh+dt@xxxxxxxxxx>; robh@xxxxxxxxxx <robh@xxxxxxxxxx>; mchehab+huawei@xxxxxxxxxx <mchehab+huawei@xxxxxxxxxx>; davem@xxxxxxxxxxxxx <davem@xxxxxxxxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx <gregkh@xxxxxxxxxxxxxxxxxxx>;
 linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx <devicetree@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>

Subject: Re: [PATCH 01/12] iio: imu: inv_icm42600: add core of new inv_icm42600 driver

 


 CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe.



On Thu, 7 May 2020 16:42:11 +0200

Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx> wrote:



> Core component of a new driver for InvenSense ICM-426xx devices.

> It includes registers definition, main probe/setup, and device

> utility functions.

> 

> ICM-426xx devices are latest generation of 6-axis IMU,

> gyroscope+accelerometer and temperature sensor. This device

> includes a 2K FIFO, supports I2C/I3C/SPI, and provides

> intelligent motion features like pedometer, tilt detection,

> and tap detection.

> 

> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>



Hi Jean-Baptiste,



A few minor things inline.



Thanks,



Jonathan



> ---

>  drivers/iio/imu/inv_icm42600/inv_icm42600.h   | 372 +++++++++++

>  .../iio/imu/inv_icm42600/inv_icm42600_core.c  | 618 ++++++++++++++++++

>  2 files changed, 990 insertions(+)

>  create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600.h

>  create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c

> 

> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h

> new file mode 100644

> index 000000000000..8da4c8249aed

> --- /dev/null

> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h

> @@ -0,0 +1,372 @@

> +/* SPDX-License-Identifier: GPL-2.0-or-later */

> +/*

> + * Copyright (C) 2020 Invensense, Inc.

> + */

> +

> +#ifndef INV_ICM42600_H_

> +#define INV_ICM42600_H_

> +

> +#include <linux/bits.h>

> +#include <linux/bitfield.h>

> +#include <linux/regmap.h>

> +#include <linux/mutex.h>

> +#include <linux/regulator/consumer.h>

> +#include <linux/pm.h>

> +#include <linux/iio/iio.h>

> +

> +enum inv_icm42600_chip {

> +     INV_CHIP_ICM42600,

> +     INV_CHIP_ICM42602,

> +     INV_CHIP_ICM42605,

> +     INV_CHIP_ICM42622,

> +     INV_CHIP_NB,

> +};

> +

> +/* serial bus slew rates */

> +enum inv_icm42600_slew_rate {

> +     INV_ICM42600_SLEW_RATE_20_60NS,

> +     INV_ICM42600_SLEW_RATE_12_36NS,

> +     INV_ICM42600_SLEW_RATE_6_18NS,

> +     INV_ICM42600_SLEW_RATE_4_12NS,

> +     INV_ICM42600_SLEW_RATE_2_6NS,

> +     INV_ICM42600_SLEW_RATE_INF_2NS,

> +};

> +

> +enum inv_icm42600_sensor_mode {

> +     INV_ICM42600_SENSOR_MODE_OFF,

> +     INV_ICM42600_SENSOR_MODE_STANDBY,

> +     INV_ICM42600_SENSOR_MODE_LOW_POWER,

> +     INV_ICM42600_SENSOR_MODE_LOW_NOISE,

> +     INV_ICM42600_SENSOR_MODE_NB,

> +};

> +

> +/* gyroscope fullscale values */

> +enum inv_icm42600_gyro_fs {

> +     INV_ICM42600_GYRO_FS_2000DPS,

> +     INV_ICM42600_GYRO_FS_1000DPS,

> +     INV_ICM42600_GYRO_FS_500DPS,

> +     INV_ICM42600_GYRO_FS_250DPS,

> +     INV_ICM42600_GYRO_FS_125DPS,

> +     INV_ICM42600_GYRO_FS_62_5DPS,

> +     INV_ICM42600_GYRO_FS_31_25DPS,

> +     INV_ICM42600_GYRO_FS_15_625DPS,

> +     INV_ICM42600_GYRO_FS_NB,

> +};

> +

> +/* accelerometer fullscale values */

> +enum inv_icm42600_accel_fs {

> +     INV_ICM42600_ACCEL_FS_16G,

> +     INV_ICM42600_ACCEL_FS_8G,

> +     INV_ICM42600_ACCEL_FS_4G,

> +     INV_ICM42600_ACCEL_FS_2G,

> +     INV_ICM42600_ACCEL_FS_NB,

> +};

> +

> +/* ODR suffixed by LN or LP are Low-Noise or Low-Power mode only */

> +enum inv_icm42600_odr {

> +     INV_ICM42600_ODR_8KHZ_LN = 3,

> +     INV_ICM42600_ODR_4KHZ_LN,

> +     INV_ICM42600_ODR_2KHZ_LN,

> +     INV_ICM42600_ODR_1KHZ_LN,

> +     INV_ICM42600_ODR_200HZ,

> +     INV_ICM42600_ODR_100HZ,

> +     INV_ICM42600_ODR_50HZ,

> +     INV_ICM42600_ODR_25HZ,

> +     INV_ICM42600_ODR_12_5HZ,

> +     INV_ICM42600_ODR_6_25HZ_LP,

> +     INV_ICM42600_ODR_3_125HZ_LP,

> +     INV_ICM42600_ODR_1_5625HZ_LP,

> +     INV_ICM42600_ODR_500HZ,

> +     INV_ICM42600_ODR_NB,

> +};

> +

> +enum inv_icm42600_filter {

> +     /* Low-Noise mode sensor data filter (3rd order filter by default) */

> +     INV_ICM42600_FILTER_BW_ODR_DIV_2,

> +

> +     /* Low-Power mode sensor data filter (averaging) */

> +     INV_ICM42600_FILTER_AVG_1X = 1,

> +     INV_ICM42600_FILTER_AVG_16X = 6,

> +};

> +

> +struct inv_icm42600_sensor_conf {

> +     int mode;

> +     int fs;

> +     int odr;

> +     int filter;

> +};

> +#define INV_ICM42600_SENSOR_CONF_INIT                {-1, -1, -1, -1}

> +

> +struct inv_icm42600_conf {

> +     struct inv_icm42600_sensor_conf gyro;

> +     struct inv_icm42600_sensor_conf accel;

> +     bool temp_en;

> +};

> +

> +struct inv_icm42600_suspended {

> +     enum inv_icm42600_sensor_mode gyro;

> +     enum inv_icm42600_sensor_mode accel;

> +     bool temp;

> +};

> +

> +/*

/**



It's valid kernel doc so lets mark it as such.



> + *  struct inv_icm42600_state - driver state variables

> + *  @lock:           chip access lock.



Nice to be a bit more specific on that.  What about the chip needs

a lock at this level as opposed to bus locks etc?



> + *  @chip:           chip identifier.

> + *  @name:           chip name.

> + *  @map:            regmap pointer.

> + *  @vdd_supply:     VDD voltage regulator for the chip.

> + *  @vddio_supply:   I/O voltage regulator for the chip.

> + *  @orientation:    sensor chip orientation relative to main hardware.

> + *  @conf:           chip sensors configurations.

> + *  @suspended:              suspended sensors configuration.

> + */

> +struct inv_icm42600_state {

> +     struct mutex lock;

> +     enum inv_icm42600_chip chip;

> +     const char *name;

> +     struct regmap *map;

> +     struct regulator *vdd_supply;

> +     struct regulator *vddio_supply;

> +     struct iio_mount_matrix orientation;

> +     struct inv_icm42600_conf conf;

> +     struct inv_icm42600_suspended suspended;

> +};

> +

> +/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */

> +

> +/* Bank selection register, available in all banks */

> +#define INV_ICM42600_REG_BANK_SEL                    0x76

> +#define INV_ICM42600_BANK_SEL_MASK                   GENMASK(2, 0)

> +

> +/* User bank 0 (MSB 0x00) */

> +#define INV_ICM42600_REG_DEVICE_CONFIG                       0x0011

> +#define INV_ICM42600_DEVICE_CONFIG_SOFT_RESET                BIT(0)

> +

> +#define INV_ICM42600_REG_DRIVE_CONFIG                        0x0013

> +#define INV_ICM42600_DRIVE_CONFIG_I2C_MASK           GENMASK(5, 3)

> +#define INV_ICM42600_DRIVE_CONFIG_I2C(_rate)         \

> +             FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_I2C_MASK, (_rate))

> +#define INV_ICM42600_DRIVE_CONFIG_SPI_MASK           GENMASK(2, 0)

> +#define INV_ICM42600_DRIVE_CONFIG_SPI(_rate)         \

> +             FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_SPI_MASK, (_rate))

> +

> +#define INV_ICM42600_REG_INT_CONFIG                  0x0014

> +#define INV_ICM42600_INT_CONFIG_INT2_LATCHED         BIT(5)

> +#define INV_ICM42600_INT_CONFIG_INT2_PUSH_PULL               BIT(4)

> +#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_HIGH     BIT(3)

> +#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_LOW              0x00

> +#define INV_ICM42600_INT_CONFIG_INT1_LATCHED         BIT(2)

> +#define INV_ICM42600_INT_CONFIG_INT1_PUSH_PULL               BIT(1)

> +#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_HIGH     BIT(0)

> +#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_LOW              0x00

> +

> +#define INV_ICM42600_REG_FIFO_CONFIG                 0x0016

> +#define INV_ICM42600_FIFO_CONFIG_MASK                        GENMASK(7, 6)

> +#define INV_ICM42600_FIFO_CONFIG_BYPASS                      \

> +             FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 0)

> +#define INV_ICM42600_FIFO_CONFIG_STREAM                      \

> +             FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 1)

> +#define INV_ICM42600_FIFO_CONFIG_STOP_ON_FULL                \

> +             FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 2)

> +

> +/* all sensor data are 16 bits (2 registers wide) in big-endian */

> +#define INV_ICM42600_REG_TEMP_DATA                   0x001D

> +#define INV_ICM42600_REG_ACCEL_DATA_X                        0x001F

> +#define INV_ICM42600_REG_ACCEL_DATA_Y                        0x0021

> +#define INV_ICM42600_REG_ACCEL_DATA_Z                        0x0023

> +#define INV_ICM42600_REG_GYRO_DATA_X                 0x0025

> +#define INV_ICM42600_REG_GYRO_DATA_Y                 0x0027

> +#define INV_ICM42600_REG_GYRO_DATA_Z                 0x0029

> +#define INV_ICM42600_DATA_INVALID                    -32768

> +

> +#define INV_ICM42600_REG_INT_STATUS                  0x002D

> +#define INV_ICM42600_INT_STATUS_UI_FSYNC             BIT(6)

> +#define INV_ICM42600_INT_STATUS_PLL_RDY                      BIT(5)

> +#define INV_ICM42600_INT_STATUS_RESET_DONE           BIT(4)

> +#define INV_ICM42600_INT_STATUS_DATA_RDY             BIT(3)

> +#define INV_ICM42600_INT_STATUS_FIFO_THS             BIT(2)

> +#define INV_ICM42600_INT_STATUS_FIFO_FULL            BIT(1)

> +#define INV_ICM42600_INT_STATUS_AGC_RDY                      BIT(0)

> +

> +/*

> + * FIFO access registers

> + * FIFO count is 16 bits (2 registers) big-endian

> + * FIFO data is a continuous read register to read FIFO content

> + */

> +#define INV_ICM42600_REG_FIFO_COUNT                  0x002E

> +#define INV_ICM42600_REG_FIFO_DATA                   0x0030

> +

> +#define INV_ICM42600_REG_SIGNAL_PATH_RESET           0x004B

> +#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_INIT_EN   BIT(6)

> +#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_MEM_RESET BIT(5)

> +#define INV_ICM42600_SIGNAL_PATH_RESET_RESET         BIT(3)

> +#define INV_ICM42600_SIGNAL_PATH_RESET_TMST_STROBE   BIT(2)

> +#define INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH    BIT(1)

> +

> +/* default configuration: all data big-endian and fifo count in bytes */

> +#define INV_ICM42600_REG_INTF_CONFIG0                        0x004C

> +#define INV_ICM42600_INTF_CONFIG0_FIFO_HOLD_LAST_DATA        BIT(7)

> +#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_REC     BIT(6)

> +#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_ENDIAN  BIT(5)

> +#define INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN BIT(4)

> +#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK   GENMASK(1, 0)

> +#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS        \

> +             FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 2)

> +#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS        \

> +             FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 3)

> +

> +#define INV_ICM42600_REG_INTF_CONFIG1                        0x004D

> +#define INV_ICM42600_INTF_CONFIG1_ACCEL_LP_CLK_RC    BIT(3)

> +

> +#define INV_ICM42600_REG_PWR_MGMT0                   0x004E

> +#define INV_ICM42600_PWR_MGMT0_TEMP_DIS                      BIT(5)

> +#define INV_ICM42600_PWR_MGMT0_IDLE                  BIT(4)

> +#define INV_ICM42600_PWR_MGMT0_GYRO(_mode)           \

> +             FIELD_PREP(GENMASK(3, 2), (_mode))

> +#define INV_ICM42600_PWR_MGMT0_ACCEL(_mode)          \

> +             FIELD_PREP(GENMASK(1, 0), (_mode))

> +

> +#define INV_ICM42600_REG_GYRO_CONFIG0                        0x004F

> +#define INV_ICM42600_GYRO_CONFIG0_FS(_fs)            \

> +             FIELD_PREP(GENMASK(7, 5), (_fs))

> +#define INV_ICM42600_GYRO_CONFIG0_ODR(_odr)          \

> +             FIELD_PREP(GENMASK(3, 0), (_odr))

> +

> +#define INV_ICM42600_REG_ACCEL_CONFIG0                       0x0050

> +#define INV_ICM42600_ACCEL_CONFIG0_FS(_fs)           \

> +             FIELD_PREP(GENMASK(7, 5), (_fs))

> +#define INV_ICM42600_ACCEL_CONFIG0_ODR(_odr)         \

> +             FIELD_PREP(GENMASK(3, 0), (_odr))

> +

> +#define INV_ICM42600_REG_GYRO_ACCEL_CONFIG0          0x0052

> +#define INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(_f)       \

> +             FIELD_PREP(GENMASK(7, 4), (_f))

> +#define INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(_f)        \

> +             FIELD_PREP(GENMASK(3, 0), (_f))

> +

> +#define INV_ICM42600_REG_TMST_CONFIG                 0x0054

> +#define INV_ICM42600_TMST_CONFIG_MASK                        GENMASK(4, 0)

> +#define INV_ICM42600_TMST_CONFIG_TMST_TO_REGS_EN     BIT(4)

> +#define INV_ICM42600_TMST_CONFIG_TMST_RES_16US               BIT(3)

> +#define INV_ICM42600_TMST_CONFIG_TMST_DELTA_EN               BIT(2)

> +#define INV_ICM42600_TMST_CONFIG_TMST_FSYNC_EN               BIT(1)

> +#define INV_ICM42600_TMST_CONFIG_TMST_EN             BIT(0)

> +

> +#define INV_ICM42600_REG_FIFO_CONFIG1                        0x005F

> +#define INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD  BIT(6)

> +#define INV_ICM42600_FIFO_CONFIG1_WM_GT_TH           BIT(5)

> +#define INV_ICM42600_FIFO_CONFIG1_TMST_FSYNC_EN              BIT(3)

> +#define INV_ICM42600_FIFO_CONFIG1_TEMP_EN            BIT(2)

> +#define INV_ICM42600_FIFO_CONFIG1_GYRO_EN            BIT(1)

> +#define INV_ICM42600_FIFO_CONFIG1_ACCEL_EN           BIT(0)

> +

> +/* FIFO watermark is 16 bits (2 registers wide) in little-endian */

> +#define INV_ICM42600_REG_FIFO_WATERMARK                      0x0060

> +#define INV_ICM42600_FIFO_WATERMARK_VAL(_wm)         \

> +             cpu_to_le16((_wm) & GENMASK(11, 0))

> +/* FIFO is 2048 bytes, let 12 samples for reading latency */

> +#define INV_ICM42600_FIFO_WATERMARK_MAX                      (2048 - 12 * 16)

> +

> +#define INV_ICM42600_REG_INT_CONFIG1                 0x0064

> +#define INV_ICM42600_INT_CONFIG1_TPULSE_DURATION     BIT(6)

> +#define INV_ICM42600_INT_CONFIG1_TDEASSERT_DISABLE   BIT(5)

> +#define INV_ICM42600_INT_CONFIG1_ASYNC_RESET         BIT(4)

> +

> +#define INV_ICM42600_REG_INT_SOURCE0                 0x0065

> +#define INV_ICM42600_INT_SOURCE0_UI_FSYNC_INT1_EN    BIT(6)

> +#define INV_ICM42600_INT_SOURCE0_PLL_RDY_INT1_EN     BIT(5)

> +#define INV_ICM42600_INT_SOURCE0_RESET_DONE_INT1_EN  BIT(4)

> +#define INV_ICM42600_INT_SOURCE0_UI_DRDY_INT1_EN     BIT(3)

> +#define INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN    BIT(2)

> +#define INV_ICM42600_INT_SOURCE0_FIFO_FULL_INT1_EN   BIT(1)

> +#define INV_ICM42600_INT_SOURCE0_UI_AGC_RDY_INT1_EN  BIT(0)

> +

> +#define INV_ICM42600_REG_WHOAMI                              0x0075

> +#define INV_ICM42600_WHOAMI_ICM42600                 0x40

> +#define INV_ICM42600_WHOAMI_ICM42602                 0x41

> +#define INV_ICM42600_WHOAMI_ICM42605                 0x42

> +#define INV_ICM42600_WHOAMI_ICM42622                 0x46

> +

> +/* User bank 1 (MSB 0x10) */

> +#define INV_ICM42600_REG_SENSOR_CONFIG0                      0x1003

> +#define INV_ICM42600_SENSOR_CONFIG0_ZG_DISABLE               BIT(5)

> +#define INV_ICM42600_SENSOR_CONFIG0_YG_DISABLE               BIT(4)

> +#define INV_ICM42600_SENSOR_CONFIG0_XG_DISABLE               BIT(3)

> +#define INV_ICM42600_SENSOR_CONFIG0_ZA_DISABLE               BIT(2)

> +#define INV_ICM42600_SENSOR_CONFIG0_YA_DISABLE               BIT(1)

> +#define INV_ICM42600_SENSOR_CONFIG0_XA_DISABLE               BIT(0)

> +

> +/* Timestamp value is 20 bits (3 registers) in little-endian */

> +#define INV_ICM42600_REG_TMSTVAL                     0x1062

> +#define INV_ICM42600_TMSTVAL_MASK                    GENMASK(19, 0)

> +

> +#define INV_ICM42600_REG_INTF_CONFIG4                        0x107A

> +#define INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY               BIT(6)

> +#define INV_ICM42600_INTF_CONFIG4_SPI_AP_4WIRE               BIT(1)

> +

> +#define INV_ICM42600_REG_INTF_CONFIG6                        0x107C

> +#define INV_ICM42600_INTF_CONFIG6_MASK                       GENMASK(4, 0)

> +#define INV_ICM42600_INTF_CONFIG6_I3C_EN             BIT(4)

> +#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_BYTE_EN    BIT(3)

> +#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_EN         BIT(2)

> +#define INV_ICM42600_INTF_CONFIG6_I3C_DDR_EN         BIT(1)

> +#define INV_ICM42600_INTF_CONFIG6_I3C_SDR_EN         BIT(0)

> +

> +/* User bank 4 (MSB 0x40) */

> +#define INV_ICM42600_REG_INT_SOURCE8                 0x404F

> +#define INV_ICM42600_INT_SOURCE8_FSYNC_IBI_EN                BIT(5)

> +#define INV_ICM42600_INT_SOURCE8_PLL_RDY_IBI_EN              BIT(4)

> +#define INV_ICM42600_INT_SOURCE8_UI_DRDY_IBI_EN              BIT(3)

> +#define INV_ICM42600_INT_SOURCE8_FIFO_THS_IBI_EN     BIT(2)

> +#define INV_ICM42600_INT_SOURCE8_FIFO_FULL_IBI_EN    BIT(1)

> +#define INV_ICM42600_INT_SOURCE8_AGC_RDY_IBI_EN              BIT(0)

> +

> +#define INV_ICM42600_REG_OFFSET_USER0                        0x4077

> +#define INV_ICM42600_REG_OFFSET_USER1                        0x4078

> +#define INV_ICM42600_REG_OFFSET_USER2                        0x4079

> +#define INV_ICM42600_REG_OFFSET_USER3                        0x407A

> +#define INV_ICM42600_REG_OFFSET_USER4                        0x407B

> +#define INV_ICM42600_REG_OFFSET_USER5                        0x407C

> +#define INV_ICM42600_REG_OFFSET_USER6                        0x407D

> +#define INV_ICM42600_REG_OFFSET_USER7                        0x407E

> +#define INV_ICM42600_REG_OFFSET_USER8                        0x407F

> +

> +/* Sleep times required by the driver */

> +#define INV_ICM42600_POWER_UP_TIME_MS                100

> +#define INV_ICM42600_RESET_TIME_MS           1

> +#define INV_ICM42600_ACCEL_STARTUP_TIME_MS   20

> +#define INV_ICM42600_GYRO_STARTUP_TIME_MS    60

> +#define INV_ICM42600_GYRO_STOP_TIME_MS               150

> +#define INV_ICM42600_TEMP_STARTUP_TIME_MS    14

> +#define INV_ICM42600_SUSPEND_DELAY_MS                2000

> +

> +typedef int (*inv_icm42600_bus_setup)(struct inv_icm42600_state *);

> +

> +extern const struct regmap_config inv_icm42600_regmap_config;

> +extern const struct dev_pm_ops inv_icm42600_pm_ops;

> +

> +const struct iio_mount_matrix *

> +inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,

> +                           const struct iio_chan_spec *chan);

> +

> +uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr);

> +

> +int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,

> +                             struct inv_icm42600_sensor_conf *conf,

> +                             unsigned int *sleep);

> +

> +int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,

> +                            struct inv_icm42600_sensor_conf *conf,

> +                            unsigned int *sleep);

> +

> +int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,

> +                            unsigned int *sleep);

> +

> +int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,

> +                          unsigned int writeval, unsigned int *readval);

> +

> +int inv_icm42600_core_probe(struct regmap *regmap, int chip,

> +                         inv_icm42600_bus_setup bus_setup);

> +

> +#endif

> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c

> new file mode 100644

> index 000000000000..35bdf4f9d31e

> --- /dev/null

> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c

> @@ -0,0 +1,618 @@

> +// SPDX-License-Identifier: GPL-2.0-or-later

> +/*

> + * Copyright (C) 2020 Invensense, Inc.

> + */

> +

> +#include <linux/device.h>

> +#include <linux/module.h>

> +#include <linux/slab.h>

> +#include <linux/delay.h>

> +#include <linux/interrupt.h>

> +#include <linux/regulator/consumer.h>

> +#include <linux/pm_runtime.h>

> +#include <linux/regmap.h>

> +#include <linux/iio/iio.h>

> +

> +#include "inv_icm42600.h"

> +

> +static const struct regmap_range_cfg inv_icm42600_regmap_ranges[] = {

> +     {

> +             .name = "user banks",

> +             .range_min = 0x0000,

> +             .range_max = 0x4FFF,

> +             .selector_reg = INV_ICM42600_REG_BANK_SEL,

> +             .selector_mask = INV_ICM42600_BANK_SEL_MASK,

> +             .selector_shift = 0,

> +             .window_start = 0,

> +             .window_len = 0x1000,

> +     },

> +};

> +

> +const struct regmap_config inv_icm42600_regmap_config = {

> +     .reg_bits = 8,

> +     .val_bits = 8,

> +     .max_register = 0x4FFF,

> +     .ranges = inv_icm42600_regmap_ranges,

> +     .num_ranges = ARRAY_SIZE(inv_icm42600_regmap_ranges),

> +};

> +EXPORT_SYMBOL_GPL(inv_icm42600_regmap_config);

> +

> +struct inv_icm42600_hw {

> +     uint8_t whoami;

> +     const char *name;

> +     const struct inv_icm42600_conf *conf;

> +};

> +

> +/* chip initial default configuration */

> +static const struct inv_icm42600_conf inv_icm42600_default_conf = {

> +     .gyro = {

> +             .mode = INV_ICM42600_SENSOR_MODE_OFF,

> +             .fs = INV_ICM42600_GYRO_FS_2000DPS,

> +             .odr = INV_ICM42600_ODR_50HZ,

> +             .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,

> +     },

> +     .accel = {

> +             .mode = INV_ICM42600_SENSOR_MODE_OFF,

> +             .fs = INV_ICM42600_ACCEL_FS_16G,

> +             .odr = INV_ICM42600_ODR_50HZ,

> +             .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,

> +     },

> +     .temp_en = false,

> +};

> +

> +static const struct inv_icm42600_hw inv_icm42600_hw[] = {

> +     [INV_CHIP_ICM42600] = {

> +             .whoami = INV_ICM42600_WHOAMI_ICM42600,

> +             .name = "icm42600",

> +             .conf = &inv_icm42600_default_conf,

> +     },

> +     [INV_CHIP_ICM42602] = {

> +             .whoami = INV_ICM42600_WHOAMI_ICM42602,

> +             .name = "icm42602",

> +             .conf = &inv_icm42600_default_conf,

> +     },

> +     [INV_CHIP_ICM42605] = {

> +             .whoami = INV_ICM42600_WHOAMI_ICM42605,

> +             .name = "icm42605",

> +             .conf = &inv_icm42600_default_conf,

> +     },

> +     [INV_CHIP_ICM42622] = {

> +             .whoami = INV_ICM42600_WHOAMI_ICM42622,

> +             .name = "icm42622",

> +             .conf = &inv_icm42600_default_conf,

> +     },

> +};

> +

> +const struct iio_mount_matrix *

> +inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,

> +                           const struct iio_chan_spec *chan)

> +{

> +     const struct inv_icm42600_state *st =

> +                     iio_device_get_drvdata((struct iio_dev *)indio_dev);



Interesting... iio_device_get_drvdata is never going to modify

the struct iio_dev.  Should we just change that to take a

const struct iio_dev * ?



> +

> +     return &st->orientation;

> +}

> +

> +uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr)

> +{

> +     static uint32_t odr_periods[INV_ICM42600_ODR_NB] = {

> +             /* reserved values */

> +             0, 0, 0,

> +             /* 8kHz */

> +             125000,

> +             /* 4kHz */

> +             250000,

> +             /* 2kHz */

> +             500000,

> +             /* 1kHz */

> +             1000000,

> +             /* 200Hz */

> +             5000000,

> +             /* 100Hz */

> +             10000000,

> +             /* 50Hz */

> +             20000000,

> +             /* 25Hz */

> +             40000000,

> +             /* 12.5Hz */

> +             80000000,

> +             /* 6.25Hz */

> +             160000000,

> +             /* 3.125Hz */

> +             320000000,

> +             /* 1.5625Hz */

> +             640000000,

> +             /* 500Hz */

> +             2000000,

> +     };

> +

> +     return odr_periods[odr];

> +}

> +

> +static int inv_icm42600_set_pwr_mgmt0(struct inv_icm42600_state *st,

> +                                   enum inv_icm42600_sensor_mode gyro,

> +                                   enum inv_icm42600_sensor_mode accel,

> +                                   bool temp, unsigned int *sleep)



msleep or similar that indicates the units of the sleep time.



> +{

> +     enum inv_icm42600_sensor_mode oldgyro = st->conf.gyro.mode;

> +     enum inv_icm42600_sensor_mode oldaccel = st->conf.accel.mode;

> +     bool oldtemp = st->conf.temp_en;

> +     unsigned int sleepval;

> +     unsigned int val;

> +     int ret;

> +

> +     /* if nothing changed, exit */

> +     if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)

> +             return 0;

> +

> +     val = INV_ICM42600_PWR_MGMT0_GYRO(gyro) |

> +           INV_ICM42600_PWR_MGMT0_ACCEL(accel);

> +     if (!temp)

> +             val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;

> +     dev_dbg(regmap_get_device(st->map), "pwr_mgmt0: %#02x\n", val);



I wonder if you have a little too much in the way of debug prints.

These are internal to the code and so could only be wrong due to a local

bug.  Once you've finished writing the driver I'd hope we won't need these!



> +     ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);

> +     if (ret)

> +             return ret;

> +

> +     st->conf.gyro.mode = gyro;

> +     st->conf.accel.mode = accel;

> +     st->conf.temp_en = temp;

> +

> +     /* compute required wait time for sensors to stabilize */

> +     sleepval = 0;

> +     /* temperature stabilization time */

> +     if (temp && !oldtemp) {

> +             if (sleepval < INV_ICM42600_TEMP_STARTUP_TIME_MS)

> +                     sleepval = INV_ICM42600_TEMP_STARTUP_TIME_MS;

> +     }

> +     /* accel startup time */

> +     if (accel != oldaccel && oldaccel == INV_ICM42600_SENSOR_MODE_OFF) {

> +             /* block any register write for at least 200 µs */

> +             usleep_range(200, 300);

> +             if (sleepval < INV_ICM42600_ACCEL_STARTUP_TIME_MS)

> +                     sleepval = INV_ICM42600_ACCEL_STARTUP_TIME_MS;

> +     }

> +     if (gyro != oldgyro) {

> +             /* gyro startup time */

> +             if (oldgyro == INV_ICM42600_SENSOR_MODE_OFF) {

> +                     /* block any register write for at least 200 µs */

> +                     usleep_range(200, 300);

> +                     if (sleepval < INV_ICM42600_GYRO_STARTUP_TIME_MS)

> +                             sleepval = INV_ICM42600_GYRO_STARTUP_TIME_MS;

> +             /* gyro stop time */

> +             } else if (gyro == INV_ICM42600_SENSOR_MODE_OFF) {

> +                     if (sleepval < INV_ICM42600_GYRO_STOP_TIME_MS)

> +                             sleepval =  INV_ICM42600_GYRO_STOP_TIME_MS;

> +             }

> +     }

> +

> +     /* deferred sleep value if sleep pointer is provided or direct sleep */

> +     if (sleep)

> +             *sleep = sleepval;

> +     else if (sleepval)

> +             msleep(sleepval);

> +

> +     return 0;

> +}

> +

> +int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,

> +                             struct inv_icm42600_sensor_conf *conf,

> +                             unsigned int *sleep)

> +{

> +     struct inv_icm42600_sensor_conf *oldconf = &st->conf.accel;

> +     unsigned int val;

> +     int ret;

> +

> +     /* Sanitize missing values with current values */

> +     if (conf->mode < 0)

> +             conf->mode = oldconf->mode;

> +     if (conf->fs < 0)

> +             conf->fs = oldconf->fs;

> +     if (conf->odr < 0)

> +             conf->odr = oldconf->odr;

> +     if (conf->filter < 0)

> +             conf->filter = oldconf->filter;

> +

> +     /* set ACCEL_CONFIG0 register (accel fullscale & odr) */

> +     if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {

> +             val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->fs) |

> +                   INV_ICM42600_ACCEL_CONFIG0_ODR(conf->odr);

> +             dev_dbg(regmap_get_device(st->map), "accel_config0: %#02x\n", val);

> +             ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);

> +             if (ret)

> +                     return ret;

> +             oldconf->fs = conf->fs;

> +             oldconf->odr = conf->odr;

> +     }

> +

> +     /* set GYRO_ACCEL_CONFIG0 register (accel filter) */

> +     if (conf->filter != oldconf->filter) {

> +             val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->filter) |

> +                   INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(st->conf.gyro.filter);

> +             dev_dbg(regmap_get_device(st->map), "gyro_accel_config0: %#02x\n", val);

> +             ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);

> +             if (ret)

> +                     return ret;

> +             oldconf->filter = conf->filter;

> +     }

> +

> +     /* set PWR_MGMT0 register (accel sensor mode) */

> +     return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode, conf->mode,

> +                                       st->conf.temp_en, sleep);

> +}

> +

> +int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,

> +                            struct inv_icm42600_sensor_conf *conf,

> +                            unsigned int *sleep)

> +{

> +     struct inv_icm42600_sensor_conf *oldconf = &st->conf.gyro;

> +     unsigned int val;

> +     int ret;

> +

> +     /* sanitize missing values with current values */

> +     if (conf->mode < 0)

> +             conf->mode = oldconf->mode;

> +     if (conf->fs < 0)

> +             conf->fs = oldconf->fs;

> +     if (conf->odr < 0)

> +             conf->odr = oldconf->odr;

> +     if (conf->filter < 0)

> +             conf->filter = oldconf->filter;

> +

> +     /* set GYRO_CONFIG0 register (gyro fullscale & odr) */

> +     if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {

> +             val = INV_ICM42600_GYRO_CONFIG0_FS(conf->fs) |

> +                   INV_ICM42600_GYRO_CONFIG0_ODR(conf->odr);

> +             dev_dbg(regmap_get_device(st->map), "gyro_config0: %#02x\n", val);

> +             ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);

> +             if (ret)

> +                     return ret;

> +             oldconf->fs = conf->fs;

> +             oldconf->odr = conf->odr;

> +     }

> +

> +     /* set GYRO_ACCEL_CONFIG0 register (gyro filter) */

> +     if (conf->filter != oldconf->filter) {

> +             val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(st->conf.accel.filter) |

> +                   INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->filter);

> +             dev_dbg(regmap_get_device(st->map), "gyro_accel_config0: %#02x\n", val);

> +             ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);

> +             if (ret)

> +                     return ret;

> +             oldconf->filter = conf->filter;

> +     }

> +

> +     /* set PWR_MGMT0 register (gyro sensor mode) */

> +     return inv_icm42600_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,

> +                                       st->conf.temp_en, sleep);

> +

> +     return 0;

> +}

> +

> +int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,

> +                            unsigned int *sleep)

> +{

> +     return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode,

> +                                       st->conf.accel.mode, enable,

> +                                       sleep);

> +}

> +

> +int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,

> +                          unsigned int writeval, unsigned int *readval)

> +{

> +     struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);

> +     int ret;

> +

> +     mutex_lock(&st->lock);

> +

> +     if (readval)

> +             ret = regmap_read(st->map, reg, readval);

> +     else

> +             ret = regmap_write(st->map, reg, writeval);

> +

> +     mutex_unlock(&st->lock);

> +

> +     return ret;

> +}

> +

> +static int inv_icm42600_set_conf(struct inv_icm42600_state *st,

> +                              const struct inv_icm42600_conf *conf)

> +{

> +     unsigned int val;

> +     int ret;

> +

> +     /* set PWR_MGMT0 register (gyro & accel sensor mode, temp enabled) */

> +     val = INV_ICM42600_PWR_MGMT0_GYRO(conf->gyro.mode) |

> +           INV_ICM42600_PWR_MGMT0_ACCEL(conf->accel.mode);

> +     if (!conf->temp_en)

> +             val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;

> +     ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);

> +     if (ret)

> +             return ret;

> +

> +     /* set GYRO_CONFIG0 register (gyro fullscale & odr) */

> +     val = INV_ICM42600_GYRO_CONFIG0_FS(conf->gyro.fs) |

> +           INV_ICM42600_GYRO_CONFIG0_ODR(conf->gyro.odr);

> +     ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);

> +     if (ret)

> +             return ret;

> +

> +     /* set ACCEL_CONFIG0 register (accel fullscale & odr) */

> +     val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->accel.fs) |

> +           INV_ICM42600_ACCEL_CONFIG0_ODR(conf->accel.odr);

> +     ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);

> +     if (ret)

> +             return ret;

> +

> +     /* set GYRO_ACCEL_CONFIG0 register (gyro & accel filters) */

> +     val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->accel.filter) |

> +           INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->gyro.filter);

> +     ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);

> +     if (ret)

> +             return ret;

> +

> +     /* update internal conf */

> +     st->conf = *conf;

> +

> +     return 0;

> +}

> +

> +/**

> + *  inv_icm42600_setup() - check and setup chip.



If doing kernel-doc (which is good) you should do it all.

So document the parameters as well.

It's worth running the kernel-doc script over any file where

you put some and fixing up any warnings / errors.



> + */

> +static int inv_icm42600_setup(struct inv_icm42600_state *st,

> +                           inv_icm42600_bus_setup bus_setup)

> +{

> +     const struct inv_icm42600_hw *hw = &inv_icm42600_hw[st->chip];

> +     const struct device *dev = regmap_get_device(st->map);

> +     unsigned int mask, val;

> +     int ret;

> +

> +     /* check chip self-identification value */

> +     ret = regmap_read(st->map, INV_ICM42600_REG_WHOAMI, &val);

> +     if (ret)

> +             return ret;

> +     if (val != hw->whoami) {

> +             dev_err(dev, "invalid whoami %#02x expected %#02x (%s)\n",

> +                     val, hw->whoami, hw->name);

> +             return -ENODEV;

> +     }

> +     dev_info(dev, "found %s (%#02x)\n", hw->name, hw->whoami);



Hmm. I'm never that keen on this sort of log noise.  Why do you need it

except for initial debug?



> +     st->name = hw->name;

> +

> +     /* reset to make sure previous state are not there */

> +     ret = regmap_write(st->map, INV_ICM42600_REG_DEVICE_CONFIG,

> +                        INV_ICM42600_DEVICE_CONFIG_SOFT_RESET);

> +     if (ret)

> +             return ret;

> +     msleep(INV_ICM42600_RESET_TIME_MS);



blank line here to separate two logical blocks of code.

Slightly helps readability.



> +     ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &val);

> +     if (ret)

> +             return ret;

> +     if (!(val & INV_ICM42600_INT_STATUS_RESET_DONE)) {

> +             dev_err(dev, "reset error, reset done bit not set\n");

> +             return -ENODEV;

> +     }

> +

> +     /* set chip bus configuration */

> +     ret = bus_setup(st);

> +     if (ret)

> +             return ret;

> +

> +     /* sensor data in big-endian (default) */

> +     mask = INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN;

> +     val = INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN;

> +     ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,

> +                              mask, val);



Long line, but I'd rather you just didn't bother will local variables

in cases like this where you just set them to a constant.

Take the 80 chars thing as guidance not a rule :)



> +     if (ret)

> +             return ret;

> +

> +     return inv_icm42600_set_conf(st, hw->conf);

> +}

> +

> +static int inv_icm42600_enable_regulator_vddio(struct inv_icm42600_state *st)

> +{

> +     int ret;

> +

> +     ret = regulator_enable(st->vddio_supply);

> +     if (ret)

> +             return ret;

> +

> +     /* wait a little for supply ramp */

> +     usleep_range(3000, 4000);

> +

> +     return 0;

> +}

> +

> +static void inv_icm42600_disable_regulators(void *_data)

> +{

> +     struct inv_icm42600_state *st = _data;

> +     const struct device *dev = regmap_get_device(st->map);

> +     int ret;

> +

> +     ret = regulator_disable(st->vddio_supply);

> +     if (ret)

> +             dev_err(dev, "failed to disable vddio error %d\n", ret);

> +

> +     ret = regulator_disable(st->vdd_supply);

> +     if (ret)

> +             dev_err(dev, "failed to disable vdd error %d\n", ret);

> +}

> +

> +static void inv_icm42600_disable_pm(void *_data)

> +{

> +     struct device *dev = _data;

> +

> +     pm_runtime_put_sync(dev);

> +     pm_runtime_disable(dev);

> +}

> +

> +int inv_icm42600_core_probe(struct regmap *regmap, int chip,

> +                         inv_icm42600_bus_setup bus_setup)

> +{

> +     struct device *dev = regmap_get_device(regmap);

> +     struct inv_icm42600_state *st;

> +     int ret;

> +

> +     BUILD_BUG_ON(ARRAY_SIZE(inv_icm42600_hw) != INV_CHIP_NB);



Why not just give the array an explicit size when you define it above?

I guess it would in theory be possible to not instantiate all of the array

but relying on different size of a variable length array seems less than

ideal.



> +     if (chip < 0 || chip >= INV_CHIP_NB) {

> +             dev_err(dev, "invalid chip = %d\n", chip);

> +             return -ENODEV;

> +     }

> +

> +     st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);

> +     if (!st)

> +             return -ENOMEM;

nitpick: blank line here.



> +     dev_set_drvdata(dev, st);

> +     mutex_init(&st->lock);

> +     st->chip = chip;

> +     st->map = regmap;

> +

> +     ret = iio_read_mount_matrix(dev, "mount-matrix", &st->orientation);

> +     if (ret) {

> +             dev_err(dev, "failed to retrieve mounting matrix %d\n", ret);

> +             return ret;

> +     }

> +

> +     st->vdd_supply = devm_regulator_get(dev, "vdd");

> +     if (IS_ERR(st->vdd_supply))

> +             return PTR_ERR(st->vdd_supply);

> +

> +     st->vddio_supply = devm_regulator_get(dev, "vddio");

> +     if (IS_ERR(st->vddio_supply))

> +             return PTR_ERR(st->vddio_supply);

> +

> +     ret = regulator_enable(st->vdd_supply);

> +     if (ret)

> +             return ret;

> +     msleep(INV_ICM42600_POWER_UP_TIME_MS);

> +

> +     ret = inv_icm42600_enable_regulator_vddio(st);

> +     if (ret) {

> +             regulator_disable(st->vdd_supply);

> +             return ret;

> +     }

> +

> +     ret = devm_add_action_or_reset(dev, inv_icm42600_disable_regulators,

> +                                    st);



I'd prefer to see two devm_add_action_or_reset calls. One for each regulator.

That means you don't have to do the extra disable logic above which is

a bit fragile in amongst a whole load of device managed calls.



> +     if (ret)

> +             return ret;

> +

> +     /* setup chip registers */

> +     ret = inv_icm42600_setup(st, bus_setup);

> +     if (ret)

> +             return ret;

> +

> +     /* setup runtime power management */

> +     ret = pm_runtime_set_active(dev);

> +     if (ret)

> +             return ret;

> +     pm_runtime_get_noresume(dev);

> +     pm_runtime_enable(dev);

> +     pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);

> +     pm_runtime_use_autosuspend(dev);

> +     pm_runtime_put(dev);

> +

> +     return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);

> +}

> +EXPORT_SYMBOL_GPL(inv_icm42600_core_probe);

> +

> +static int __maybe_unused inv_icm42600_suspend(struct device *dev)

> +{

> +     struct inv_icm42600_state *st = dev_get_drvdata(dev);

> +     int ret;

> +

> +     mutex_lock(&st->lock);

> +

> +     st->suspended.gyro = st->conf.gyro.mode;

> +     st->suspended.accel = st->conf.accel.mode;

> +     st->suspended.temp = st->conf.temp_en;

> +     if (pm_runtime_suspended(dev)) {

> +             ret = 0;

> +             goto out_unlock;

> +     }

> +

> +     ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,

> +                                      INV_ICM42600_SENSOR_MODE_OFF, false,

> +                                      NULL);

> +     if (ret)

> +             goto out_unlock;

> +

> +     regulator_disable(st->vddio_supply);

> +

> +out_unlock:

> +     mutex_unlock(&st->lock);

> +     return ret;

> +}

> +

> +static int __maybe_unused inv_icm42600_resume(struct device *dev)

> +{

> +     struct inv_icm42600_state *st = dev_get_drvdata(dev);

> +     int ret;

> +

> +     mutex_lock(&st->lock);

> +

> +     ret = inv_icm42600_enable_regulator_vddio(st);

> +     if (ret)

> +             goto out_unlock;

> +

> +     pm_runtime_disable(dev);

> +     pm_runtime_set_active(dev);

> +     pm_runtime_enable(dev);

> +

> +     /* restore sensors state */

> +     ret = inv_icm42600_set_pwr_mgmt0(st, st->suspended.gyro,

> +                                      st->suspended.accel,

> +                                      st->suspended.temp, NULL);

> +     if (ret)

> +             goto out_unlock;



You may need this later, but for now it's a bit comic so ideally introduce

it only when needed.



> +

> +out_unlock:

> +     mutex_unlock(&st->lock);

> +     return ret;

> +}

> +

> +static int __maybe_unused inv_icm42600_runtime_suspend(struct device *dev)

> +{

> +     struct inv_icm42600_state *st = dev_get_drvdata(dev);

> +     int ret;

> +

> +     mutex_lock(&st->lock);

> +

> +     /* disable all sensors */

> +     ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,

> +                                      INV_ICM42600_SENSOR_MODE_OFF, false,

> +                                      NULL);

> +     if (ret)

> +             goto error_unlock;

> +

> +     regulator_disable(st->vddio_supply);

> +

> +error_unlock:

> +     mutex_unlock(&st->lock);

> +     return ret;

> +}

> +

> +static int __maybe_unused inv_icm42600_runtime_resume(struct device *dev)

> +{

> +     struct inv_icm42600_state *st = dev_get_drvdata(dev);

> +     int ret;

> +

> +     mutex_lock(&st->lock);

> +



Why don't we need to reenable all the sensors we disabled in runtime suspend?

I can guess why we might not, but a comment here to explain would save on

possible confusion..



> +     ret = inv_icm42600_enable_regulator_vddio(st);

> +

> +     mutex_unlock(&st->lock);

> +     return ret;

> +}

> +

> +const struct dev_pm_ops inv_icm42600_pm_ops = {

> +     SET_SYSTEM_SLEEP_PM_OPS(inv_icm42600_suspend, inv_icm42600_resume)

> +     SET_RUNTIME_PM_OPS(inv_icm42600_runtime_suspend,

> +                        inv_icm42600_runtime_resume, NULL)

> +};

> +EXPORT_SYMBOL_GPL(inv_icm42600_pm_ops);

> +

> +MODULE_AUTHOR("InvenSense, Inc.");

> +MODULE_DESCRIPTION("InvenSense ICM-426xx device driver");

> +MODULE_LICENSE("GPL");










[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux