On Tue, May 12, 2020 at 04:51:02PM +0100, Kieran Bingham wrote: > From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > > The MAX9286 deserializes video data received on up to 4 Gigabit > Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up > to 4 data lanes. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > --- > > v7: > - Collect Rob's RB tag > - Remove redundant maxItems from remote-endpoints > - Fix SPDX licence tag > > .../bindings/media/i2c/maxim,max9286.yaml | 287 ++++++++++++++++++ > 1 file changed, 287 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > new file mode 100644 > index 000000000000..f9d3e5712c59 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml > @@ -0,0 +1,287 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2019 Renesas Electronics Corp. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim Integrated Quad GMSL Deserializer > + > +maintainers: > + - Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > + - Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > + - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > + - Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > + > +description: | > + The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia > + Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data > + lanes. > + > + In addition to video data, the GMSL links carry a bidirectional control > + channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic > + not addressed to itself to the other side of the links, where a GMSL > + serializer will output it on a local I2C bus. In the other direction all I2C > + traffic received over GMSL by the MAX9286 is output on the local I2C bus. > + > +properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + compatible: > + const: maxim,max9286 > + > + reg: > + description: I2C device address > + maxItems: 1 > + > + poc-supply: > + description: Regulator providing Power over Coax to the cameras > + maxItems: 1 > + > + enable-gpios: > + description: GPIO connected to the \#PWDN pin with inverted polarity > + maxItems: 1 > + > + ports: > + type: object > + description: | > + The connections to the MAX9286 GMSL and its endpoint nodes are modelled > + using the OF graph bindings in accordance with the video interface > + bindings defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + The following table lists the port number corresponding to each device > + port. > + > + Port Description > + ---------------------------------------- > + Port 0 GMSL Input 0 > + Port 1 GMSL Input 1 > + Port 2 GMSL Input 2 > + Port 3 GMSL Input 3 > + Port 4 CSI-2 Output > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + port@[0-3]: > + type: object > + properties: > + reg: > + enum: [ 0, 1, 2, 3 ] > + > + endpoint: > + type: object > + > + properties: > + remote-endpoint: > + description: | > + phandle to the remote GMSL source endpoint subnode in the > + remote node port. > + > + required: > + - remote-endpoint > + > + required: > + - reg > + - endpoint > + > + additionalProperties: false > + > + port@4: > + type: object > + properties: > + reg: > + const: 4 > + > + endpoint: > + type: object > + > + properties: > + remote-endpoint: > + description: phandle to the remote CSI-2 sink endpoint. > + > + data-lanes: > + description: array of physical CSI-2 data lane indexes. > + > + required: > + - remote-endpoint > + - data-lanes > + > + required: > + - reg > + - endpoint > + > + additionalProperties: false > + > + required: > + - port@4 > + > + i2c-mux: > + type: object > + description: | > + Each GMSL link is modelled as a child bus of an i2c bus > + multiplexer/switch, in accordance with bindings described in > + Documentation/devicetree/bindings/i2c/i2c-mux.txt. The serializer > + device on the remote end of the GMSL link shall be modelled as a child > + node of the corresponding I2C bus. > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + additionalProperties: false Wrong indentation. Should be 2 more or this is a DT property. > + > +required: > + - compatible > + - reg > + - ports > + - i2c-mux > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c@e66d8000 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <0 0xe66d8000 0 0x40>; > + > + gmsl-deserializer@2c { > + compatible = "maxim,max9286"; > + reg = <0x2c>; > + poc-supply = <&camera_poc_12v>; > + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + max9286_in0: endpoint { > + remote-endpoint = <&rdacm20_out0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + max9286_in1: endpoint { > + remote-endpoint = <&rdacm20_out1>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + max9286_in2: endpoint { > + remote-endpoint = <&rdacm20_out2>; > + }; > + }; > + > + port@3 { > + reg = <3>; > + > + max9286_in3: endpoint { > + remote-endpoint = <&rdacm20_out3>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + > + max9286_out: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&csi40_in>; > + }; > + }; > + }; > + > + i2c-mux { > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <0>; > + > + camera@51 { > + reg = <0x51>; > + > + port { > + rdacm20_out0: endpoint { > + remote-endpoint = <&max9286_in0>; > + }; > + }; > + > + }; > + }; > + > + i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + camera@52 { > + reg = <0x52>; > + > + port { > + rdacm20_out1: endpoint { > + remote-endpoint = <&max9286_in1>; > + }; > + }; > + }; > + }; > + > + i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + camera@53 { > + reg = <0x53>; > + > + port { > + rdacm20_out2: endpoint { > + remote-endpoint = <&max9286_in2>; > + }; > + }; > + }; > + }; > + > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + camera@54 { > + reg = <0x54>; > + > + port { > + rdacm20_out3: endpoint { > + remote-endpoint = <&max9286_in3>; > + }; > + }; > + }; > + }; > + }; > + }; > + }; > -- > 2.25.1 >
