Add devicetree YAML binding for Qualcomm Inter-Processor Communication Controller (IPCC) block. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- .../bindings/mailbox/qcom-ipcc.yaml | 77 +++++++++++++++++++ include/dt-bindings/mailbox/qcom-ipcc.h | 33 ++++++++ 2 files changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml create mode 100644 include/dt-bindings/mailbox/qcom-ipcc.h diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml new file mode 100644 index 000000000000..62e7bc8ceb0b --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> + +description: + The Inter-Processor Communication Controller (IPCC) is a centralized hardware + to route interrupts across various subsystems. It involves a three-level + addressing scheme called protocol, client and signal. For example, consider an + entity on the Application Processor Subsystem (APSS) that wants to listen to + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such + a case, the client would be Modem (client-id is 2) and the signal would be + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC) + protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h + for the list of such IDs. + +properties: + compatible: + const: "qcom,ipcc" + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: + The first cell is the client-id, the second cell is the signal-id and the + third cell is the interrupt type. + + "#mbox-cells": + const: 2 + description: + The first cell is the client-id, and the second cell is the signal-id. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + mailbox: qcom,ipcc@408000 { + compatible = "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>; + + /* Other SMP2P fields */ + }; diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h new file mode 100644 index 000000000000..b8c04f6df57c --- /dev/null +++ b/include/dt-bindings/mailbox/qcom-ipcc.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_BINDINGS_MAILBOX_IPCC_H +#define __DT_BINDINGS_MAILBOX_IPCC_H + +/* Signal IDs for MPROC protocol */ +#define IPCC_MPROC_SIGNAL_GLINK_QMP 0 +#define IPCC_MPROC_SIGNAL_SMP2P 2 +#define IPCC_MPROC_SIGNAL_PING 3 + +/* Client IDs */ +#define IPCC_CLIENT_AOP 0 +#define IPCC_CLIENT_TZ 1 +#define IPCC_CLIENT_MPSS 2 +#define IPCC_CLIENT_LPASS 3 +#define IPCC_CLIENT_SLPI 4 +#define IPCC_CLIENT_SDC 5 +#define IPCC_CLIENT_CDSP 6 +#define IPCC_CLIENT_NPU 7 +#define IPCC_CLIENT_APSS 8 +#define IPCC_CLIENT_GPU 9 +#define IPCC_CLIENT_CVP 10 +#define IPCC_CLIENT_CAM 11 +#define IPCC_CLIENT_VPU 12 +#define IPCC_CLIENT_PCIE0 13 +#define IPCC_CLIENT_PCIE1 14 +#define IPCC_CLIENT_PCIE2 15 +#define IPCC_CLIENT_SPSS 16 + +#endif -- 2.17.1
