Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
Changes since v1:
- Moved sub-node into MFD file leaving just the properties in here
- Removed contains on the compatible
- Added a required -pins suffix for pinmux/ctrl nodes
- Added some extra blank lines for readability
Thanks,
Charles
.../bindings/pinctrl/cirrus,lochnagar.txt | 141 ---------------
.../bindings/pinctrl/cirrus,lochnagar.yaml | 191 +++++++++++++++++++++
2 files changed, 191 insertions(+), 141 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
deleted file mode 100644
index a87447180e838..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the pinctrl portion
-of the driver.
-
-Also see these documents for generic binding information:
- [1] GPIO : ../gpio/gpio.txt
- [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
-
-And these for relevant defines:
- [3] include/dt-bindings/pinctrl/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
- [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar-pinctrl"
-
- - gpio-controller : Indicates this device is a GPIO controller.
- - #gpio-cells : Must be 2. The first cell is the pin number, see
- [3] for available pins and the second cell is used to specify
- optional parameters, see [1].
- - gpio-ranges : Range of pins managed by the GPIO controller, see
- [1]. Both the GPIO and Pinctrl base should be set to zero and the
- count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
- see [3].
-
- - pinctrl-names : A pinctrl state named "default" must be defined.
- - pinctrl-0 : A phandle to the default pinctrl state.
-
-Required sub-nodes:
-
-The pin configurations are defined as a child of the pinctrl states
-node, see [2]. Each sub-node can have the following properties:
- - groups : A list of groups to select (either this or "pins" must be
- specified), available groups:
- codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
- psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
- usb-aif2, adat-aif, soundcard-aif
- - pins : A list of pin names to select (either this or "groups" must
- be specified), available pins:
- fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
- fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
- codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
- dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
- gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
- codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
- codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
- codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
- codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
- dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
- dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
- psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
- psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
- gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
- gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
- gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
- gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
- dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
- codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
- codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
- codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
- dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
- i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
- codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
- gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
- - function : The mux function to select, available functions:
- aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
- fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
- codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
- dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
- gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
- dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
- clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
- gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
- dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
- codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
- codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
- codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
- codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
- dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
- dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
- gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
- i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1,
- psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
- psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
- codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
- codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
- codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
- codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
- dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
- dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
- dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
- gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
- gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
- gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
- gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
- gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
-
- - output-enable : Specifies that an AIF group will be used as a master
- interface (either this or input-enable is required if a group is
- being muxed to an AIF)
- - input-enable : Specifies that an AIF group will be used as a slave
- interface (either this or output-enable is required if a group is
- being muxed to an AIF)
-
-Example:
-
-lochnagar-pinctrl {
- compatible = "cirrus,lochnagar-pinctrl";
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pin-settings>;
-
- pin-settings: pin-settings {
- ap-aif {
- input-enable;
- groups = "gf-aif1";
- function = "codec-aif3";
- };
- codec-aif {
- output-enable;
- groups = "codec-aif3";
- function = "gf-aif1";
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000000..2d6f832f1e4c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@xxxxxxxxxxxxxxxxxxxxx
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the pinctrl portion of
+ the driver.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+ [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+ And these for relevant defines:
+ [3] include/dt-bindings/pinctrl/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar-pinctrl
+
+ gpio-controller:
+ description:
+ Indicates this device is a GPIO controller.
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used
+ to specify optional parameters.
+ const: 2
+
+ gpio-ranges:
+ description:
+ Range of pins managed by the GPIO controller, see [1]. Both the
+ GPIO and Pinctrl base should be set to zero and the count to the
+ appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+ maxItems: 1
+
+ pinctrl-0:
+ description:
+ A phandle to the default pinctrl state.
+
+ pinctrl-names:
+ description:
+ A pinctrl state named "default" must be defined.
+ const: default
+
+patternProperties:
+ '^.*$':
+ patternProperties:
+ '^.*-pins$':
+ description:
+ The pin configurations are defined as a child of the pinctrl
+ states node, see [2]. Each sub-node can have the following
+ properties.
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ A list of groups to select (either this or "pins" must be
+ specified), available groups.
+ enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+ dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+ gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ pins:
+ description:
+ A list of pin names to select (either this or "groups" must
+ be specified), available pins.
+ enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+ codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+ codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+ codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+ codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+ dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+ dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+ dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+ psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+ psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+ gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+ gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+ gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+ gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+ gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+ codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+ codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+ codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+ codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+ dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+ i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+ dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+ psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+ dsp-gpio20, led1, led2 ]
+
+ function:
+ description:
+ The mux function to select, available functions.
+ enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+ dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+ spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+ clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+ gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+ codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+ spdif-mclk, codec-irq, codec-reset, dsp-reset,
+ dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+ codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+ codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+ codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+ codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+ dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+ i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+ i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+ psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+ psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+ codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+ codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+ codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+ codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+ codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+ dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+ dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+ dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+ gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+ gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+ gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+ gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+ gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+ gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ output-enable:
+ description:
+ Specifies that an AIF group will be used as a master
+ interface (either this or input-enable is required if a
+ group is being muxed to an AIF)
+
+ input-enable:
+ description:
+ Specifies that an AIF group will be used as a slave
+ interface (either this or output-enable is required if a
+ group is being muxed to an AIF)
+
+ additionalProperties: false
+ required:
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - pinctrl-0
+ - pinctrl-names
--
2.11.0
