Convert the generic IPMI controller bindings to DT schema format
using json-schema.
The device_type property is deprecated for most node per the DT spec,
but at least the Linux driver matches on it, so I keep it in.
The Linux driver parses for some additional and optional properties,
but there are no in-tree users. Let's allow extra properties to cover
any other users.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
.../devicetree/bindings/ipmi/ipmi-smic.txt | 25 --------
.../devicetree/bindings/ipmi/ipmi-smic.yaml | 63 +++++++++++++++++++
2 files changed, 63 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
create mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
deleted file mode 100644
index d5f1a877ed3e..000000000000
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-IPMI device
-
-Required properties:
-- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
-- device_type: should be ipmi
-- reg: Address and length of the register set for the device
-
-Optional properties:
-- interrupts: The interrupt for the device. Without this the interface
- is polled.
-- reg-size - The size of the register. Defaults to 1
-- reg-spacing - The number of bytes between register starts. Defaults to 1
-- reg-shift - The amount to shift the registers to the right to get the data
- into bit zero.
-
-Example:
-
-smic@fff3a000 {
- compatible = "ipmi-smic";
- device_type = "ipmi";
- reg = <0xfff3a000 0x1000>;
- interrupts = <0 24 4>;
- reg-size = <4>;
- reg-spacing = <4>;
-};
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 000000000000..f0bb157e9417
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI device bindings
+
+description: IPMI device bindings
+
+maintainers:
+ - Corey Minyard <cminyard@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - ipmi-kcs
+ - ipmi-smic
+ - ipmi-bt
+
+ device_type:
+ items:
+ - const: "ipmi"
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Interface is polled if this property is omitted.
+ maxItems: 1
+
+ reg-size:
+ description: The access width of the register in bytes. Defaults to 1.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [1, 2, 4, 8]
+
+ reg-spacing:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The number of bytes between register starts. Defaults to 1.
+
+ reg-shift:
+ description: |
+ The amount of bits to shift the register content to the right to get
+ the data into bit zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maximum: 56
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ smic@fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
--
2.17.1
