Hi, this is the DT schema bindings conversion part of the v2 Calxeda update series. The .dts part was already merged, so this tackles what is left. This series converts the "prose" DT binding documentation for various devices used by the Calxeda platform to the json-schema format, so that the automatic checking actually does something useful. After those patches "make dtbs_check" comes back clean for the two .dts files in the kernel, and "dt_validate -m" reports only those three not-covered nodes (on Highbank, only the last one on Midway): arm,cortex-a9-twd-timer arm,cortex-a9-twd-wdt calxeda,hb-sdhci The first two are generic ARM devices, for which the binding doc just does not have been converted yet. The SDHCI controller is actually disabled in the DTs, and the SD slot is populated on very few special systems only, also there has never been a driver in the kernel for this device anyway. Verified by trying to break every single assumption the bindings make (in their example section): the tooling complained correctly. Thanks, Andre Changelog: v2 ... v3: - adjust license to name both BSD and GPL - add missing address specifier for clock nodes' names - properly group phandle properties in SATA bindings example - use itemised interrupt description in l2ecc binding - limit reg-shift in the IPMI binding - allow device_type property in IPMI binding v1 ... v2: - Remove unneeded property type from clocks and sgpio-gpio - add additionalProperties: false to bindings missing it before - limit number in "phydev" to the hardware constraint of 5 bits - add required: properties to l2ecc binding - fix enumeration of compatible strings in calxeda-ddr-ctrlr Andre Przywara (8): dt-bindings: clock: Convert Calxeda clock bindings to json-schema dt-bindings: sata: Convert Calxeda SATA controller to json-schema dt-bindings: net: Convert Calxeda Ethernet binding to json-schema dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema dt-bindings: arm: Convert Calxeda L2 cache controller to json-schema dt-bindings: memory-controllers: Convert Calxeda DDR to json-schema dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schema dt-bindings: arm: Add Calxeda system registers json-schema binding .../bindings/arm/calxeda/hb-sregs.yaml | 49 ++++++++++ .../devicetree/bindings/arm/calxeda/l2ecc.txt | 15 --- .../bindings/arm/calxeda/l2ecc.yaml | 42 ++++++++ .../devicetree/bindings/ata/sata_highbank.txt | 44 --------- .../bindings/ata/sata_highbank.yaml | 95 +++++++++++++++++++ .../devicetree/bindings/clock/calxeda.txt | 17 ---- .../devicetree/bindings/clock/calxeda.yaml | 82 ++++++++++++++++ .../devicetree/bindings/ipmi/ipmi-smic.txt | 25 ----- .../devicetree/bindings/ipmi/ipmi-smic.yaml | 63 ++++++++++++ .../memory-controllers/calxeda-ddr-ctrlr.txt | 16 ---- .../memory-controllers/calxeda-ddr-ctrlr.yaml | 42 ++++++++ .../devicetree/bindings/net/calxeda-xgmac.txt | 18 ---- .../bindings/net/calxeda-xgmac.yaml | 49 ++++++++++ .../bindings/phy/calxeda-combophy.txt | 17 ---- .../bindings/phy/calxeda-combophy.yaml | 51 ++++++++++ 15 files changed, 473 insertions(+), 152 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml delete mode 100644 Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt create mode 100644 Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml delete mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.yaml delete mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt create mode 100644 Documentation/devicetree/bindings/clock/calxeda.yaml delete mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.txt create mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml delete mode 100644 Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml -- 2.17.1
