Re: [PATCH v6 2/4] dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sandeep,

This is a bit misleading/confusing. Patch "1/4] dt-bindings: phy: qcom,qmp:
Convert QMP PHY bindings to yaml" does the conversion to yaml AND removes
the binding for USB3 DP PHY, then this patch adds it again. Patches should
be self-contained and their commit messages shouldn't omit important details.
If the first patch is applied in isolation the USB3 DP PHY binding disappears
silently, supposedly with the approval from Rob, who reviewed an earlier
version of the patch without the removal.

I think there are two options:

1) one patch with the (complete) conversion to a single yaml file, plus
   a separate patch that moves the DP PHY binding to its own file

2) a single patch which does the conversion to yaml and moves the DP PHY
   binding to its own file

IMO 1) is slightly better, but both should be ok.

Thanks

Matthias

On Tue, Apr 28, 2020 at 07:36:13PM +0530, Sandeep Maheswaram wrote:
> Split out the dt bindings for USB3 DP PHY from qcom,qmp bindings
> for modularity.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
>  .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml         | 135 +++++++++++++++++++++
>  1 file changed, 135 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> new file mode 100644
> index 0000000..6055786
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm QMP USB3 DP PHY controller
> +
> +maintainers:
> +  - Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const:
> +      qcom,sdm845-qmp-usb3-phy
> +  reg:
> +    items:
> +      - description: Address and length of PHY's common serdes block.
> +      - description: Address and length of the DP_COM control block.
> +
> +  reg-names:
> +    items:
> +      - const: reg-base
> +      - const: dp_com
> +
> +  "#clock-cells":
> +     enum: [ 1, 2 ]
> +
> +  "#address-cells":
> +    enum: [ 1, 2 ]
> +
> +  "#size-cells":
> +    enum: [ 1, 2 ]
> +
> +  clocks:
> +    items:
> +      - description: Phy aux clock.
> +      - description: Phy config clock.
> +      - description: 19.2 MHz ref clk.
> +      - description: Phy common block aux clock.
> +
> +  clock-names:
> +    items:
> +      - const: aux
> +      - const: cfg_ahb
> +      - const: ref
> +      - const: com_aux
> +
> +  resets:
> +    items:
> +      - description: reset of phy block.
> +      - description: phy common block reset.
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +      - const: common
> +
> +  vdda-phy-supply:
> +    description:
> +        Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +        Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +  vddp-ref-clk-supply:
> +    description:
> +        Phandle to a regulator supply to any specific refclk
> +        pll block.
> +
> +#Required nodes:
> +patternProperties:
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each device node of QMP phy is required to have as many child nodes as
> +      the number of lanes the PHY has.
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - "#clock-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +    usb_1_qmpphy: phy-wrapper@88e9000 {
> +        compatible = "qcom,sdm845-qmp-usb3-phy";
> +        reg = <0 0x088e9000 0 0x18c>,
> +              <0 0x088e8000 0 0x10>;
> +        reg-names = "reg-base", "dp_com";
> +        #clock-cells = <1>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> +                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> +        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +
> +        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> +        reset-names = "phy", "common";
> +
> +        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
> +        vdda-pll-supply = <&vdda_usb2_ss_core>;
> +
> +        usb_1_ssphy: phy@88e9200 {
> +                reg = <0 0x088e9200 0 0x128>,
> +                      <0 0x088e9400 0 0x200>,
> +                      <0 0x088e9c00 0 0x218>,
> +                      <0 0x088e9600 0 0x128>,
> +                      <0 0x088e9800 0 0x200>,
> +                      <0 0x088e9a00 0 0x100>;
> +                #clock-cells = <0>;
> +                #phy-cells = <0>;
> +                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +                clock-names = "pipe0";
> +                clock-output-names = "usb3_phy_pipe_clk_src";
> +            };
> +        };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux