Split out the dt bindings for USB3 DP PHY from qcom,qmp bindings for modularity. Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> --- .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 135 +++++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml new file mode 100644 index 0000000..6055786 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Qualcomm QMP USB3 DP PHY controller + +maintainers: + - Manu Gautam <mgautam@xxxxxxxxxxxxxx> + +properties: + compatible: + const: + qcom,sdm845-qmp-usb3-phy + reg: + items: + - description: Address and length of PHY's common serdes block. + - description: Address and length of the DP_COM control block. + + reg-names: + items: + - const: reg-base + - const: dp_com + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk + pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - reg-names + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + reg-names = "reg-base", "dp_com"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
