This provides an example DT binding for the MIPI DSI host controller present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP. Cc: Rob Herring <robh@xxxxxxxxxx> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Cc: Fabio Estevam <festevam@xxxxxxxxx> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Tested-by: Adrian Pop <pop.adrian61@xxxxxxxxx> Tested-by: Arnaud Ferraris <arnaud.ferraris@xxxxxxxxxxxxx> Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxx> Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> --- Changes since v7: - Clarified port@0,1 descriptions, marked them as required and added missing port@0 in example (Laurent) Changes since v6: - Added ref to the newly created snps,dw-mipi-dsi.yaml (Laurent) - Moved *-cells properties outside patternProperties (Laurent) - Removed the panel port documentation (Laurent) - Wrapped lines at 80 chars, typo fixes, sort includes (Laurent) Changes since v5: - Fixed missing reg warning (Fabio) - Updated dt-schema and fixed warnings (Rob) Changes since v4: - Fixed yaml binding to pass `make dt_binding_check dtbs_check` and addressed received binding feedback (Rob) Changes since v3: - Added commit message (Neil) - Converted to yaml format (Neil) - Minor dt node + driver fixes (Rob) - Added small panel example to the host controller binding Changes since v2: - Fixed commit tags (Emil) --- .../display/imx/fsl,mipi-dsi-imx6.yaml | 145 ++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml new file mode 100644 index 0000000000000..c2c3489e63fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DW MIPI DSI Host Controller + +maintainers: + - Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> + +description: | + The i.MX6 DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 + IP block with a companion PHY IP. + + These DT bindings follow the Synopsys DW MIPI DSI bindings defined in + Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with + the following device-specific properties. + +allOf: + - $ref: ../bridge/snps,dw-mipi-dsi.yaml# + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + items: + - const: fsl,imx6q-mipi-dsi + - const: snps,dw-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: DSI bus clock + + clock-names: + items: + - const: ref + - const: pclk + + fsl,gpr: + description: + Phandle to the iomuxc-gpr region containing the multiplexer ctrl register. + $ref: /schemas/types.yaml#/definitions/phandle + + ports: + type: object + description: | + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: + DSI input port connected to a parallel RGB LTDC output port. + + port@1: + type: object + description: + DSI serial RGB output port connected to a panel or bridge input port. + + required: + - port@0 + - port@1 + +additionalProperties: false + +patternProperties: + "^panel@[0-3]$": + type: object + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +examples: + - |+ + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi: dsi@21e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x021e0000 0x4000>; + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + fsl,gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>, + <&clks IMX6QDL_CLK_MIPI_IPG>; + clock-names = "ref", "pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + mipi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_mipi>; + }; + }; + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "sharp,ls032b3sx01"; + reg = <0>; + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + }; + +... -- 2.26.0
