Re: [PATCH] ARM: dts: imx6ull: add MYiR MYS-6ULX SBC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Parthiban,

a few more minor comments..

On 20-04-08 20:43, Parthiban Nallathambi wrote:

...

> diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
> new file mode 100644
> index 000000000000..f0a514187c21
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
> @@ -0,0 +1,247 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Linumiz
> + * Author: Parthiban Nallathambi <parthiban@xxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "MYiR MYS-6ULX Single Board Computer";
> +	compatible = "myir,imx6ull-mys-6ulx", "fsl,imx6ull";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	regulators: regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdd_5v: regulator@0 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VDD_5V";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +
> +		vdd_3v3: regulator@1 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VDD_3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +			vin-supply = <&vdd_5v>;
> +		};
> +	};
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet1>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy0>;
> +	phy-supply = <&vdd_3v3>;
> +	status = "okay";
> +
> +	mdio: mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy@0 {
> +			reg = <0>;
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			interrupt-parent = <&gpio5>;
> +			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clks IMX6UL_CLK_ENET_REF>;
> +			clock-names = "rmii-ref";
> +			status = "okay";

Status not needed here.

> +		};
> +	};
> +};
> +
> +&gpmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpmi_nand>;
> +	nand-on-flash-bbt;
> +	status = "disabled";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb_otg1_id>;
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
> +	no-1-8-v;
> +	keep-power-in-suspend;
> +	wakeup-source;
> +	vmmc-supply = <&vdd_3v3>;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
> +	bus-width = <8>;
> +	non-removable;
> +	keep-power-in-suspend;
> +	vmmc-supply = <&vdd_3v3>;
> +	status = "disabled";

Status not needed here.

Regards,
  Marco

> +};
> +
> +&iomuxc {
> +	pinctrl_enet1: enet1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
> +			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
> +			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
> +			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_gpmi_nand: gpminandgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
> +			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
> +			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
> +			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
> +			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
> +			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
> +			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
> +			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
> +			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
> +			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
> +			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
> +			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
> +			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
> +			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
> +			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usb_otg1_id: usbotg1idgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
> +			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
> +			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
> +			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
> +			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
> +			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
> +			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
> +			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
> +			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
> +			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
> +			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
> +			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
> +			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
> +			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
> +		>;
> +	};
> +};
> -- 
> 2.11.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux