On 26/4/2020 3:35 am, Jonathan Cameron wrote:
On Mon, 20 Apr 2020 12:26:08 +0800
Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> wrote:
Conversion of the ltc2632 to yaml format and name the file 'lltc,ltc2632.yaml'.
Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
There is something odd going on with indentation but otherwise looks fine to me.
However we need to leave time for a final DT review.
Thanks,
Jonathan
I will wait for the review, and fix the indent together with / or without any
changes
lining up. I think a good Idea to get a yaml extension for my 'vim'.
Cheers,
Chris
---
v5:
correct require section
set maintainer of analog.com
v4..v2: no change
.../bindings/iio/dac/lltc,ltc2632.yaml | 76 +++++++++++++++++++
.../devicetree/bindings/iio/dac/ltc2632.txt | 49 ------------
2 files changed, 76 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 000000000000..b0043144fbc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@xxxxxxxxxx>
+
+description: |
+ Bindings for the Linear Technology LTC2632/2634/2636 DAC
+ Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2632-l12
+ - lltc,ltc2632-l10
+ - lltc,ltc2632-l8
+ - lltc,ltc2632-h12
+ - lltc,ltc2632-h10
+ - lltc,ltc2632-h8
+ - lltc,ltc2634-l12
+ - lltc,ltc2634-l10
+ - lltc,ltc2634-l8
+ - lltc,ltc2634-h12
+ - lltc,ltc2634-h10
+ - lltc,ltc2634-h8
+ - lltc,ltc2636-l12
+ - lltc,ltc2636-l10
+ - lltc,ltc2636-l8
+ - lltc,ltc2636-h12
+ - lltc,ltc2636-h10
+ - lltc,ltc2636-h8
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 2000000
+
+ vref-supply:
+ description:
+ Phandle to the external reference voltage supply. This should
+ only be set if there is an external reference voltage connected to the VREF
+ pin. If the property is not set the internal reference is used.
Odd intent going on there.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ vref: regulator-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-ltc2632";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ };
+
+ spi_master {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac: ltc2632@0 {
+ compatible = "lltc,ltc2632";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
deleted file mode 100644
index 1ab9570cf219..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Linear Technology LTC2632/2634/2636 DAC
-
-Required properties:
- - compatible: Has to contain one of the following:
- lltc,ltc2632-l12
- lltc,ltc2632-l10
- lltc,ltc2632-l8
- lltc,ltc2632-h12
- lltc,ltc2632-h10
- lltc,ltc2632-h8
- lltc,ltc2634-l12
- lltc,ltc2634-l10
- lltc,ltc2634-l8
- lltc,ltc2634-h12
- lltc,ltc2634-h10
- lltc,ltc2634-h8
- lltc,ltc2636-l12
- lltc,ltc2636-l10
- lltc,ltc2636-l8
- lltc,ltc2636-h12
- lltc,ltc2636-h10
- lltc,ltc2636-h8
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Optional properties:
- - vref-supply: Phandle to the external reference voltage supply. This should
- only be set if there is an external reference voltage connected to the VREF
- pin. If the property is not set the internal reference is used.
-
-Example:
-
- vref: regulator-vref {
- compatible = "regulator-fixed";
- regulator-name = "vref-ltc2632";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- };
-
- spi_master {
- dac: ltc2632@0 {
- compatible = "lltc,ltc2632-l12";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>; /* optional */
- };
- };
--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521
Disclaimer: https://www.gtsys.com.hk/email/classified.html
