Hi Adrian,
On Wed, Apr 22, 2020 at 12:33:10PM +0300, Adrian Ratiu wrote:
> On Wed, 22 Apr 2020, Laurent Pinchart wrote:
> > On Tue, Apr 21, 2020 at 07:16:06PM +0300, Adrian Ratiu wrote:
> >> This adds support for the Synopsis DesignWare MIPI DSI v1.01
> >> host controller which is embedded in i.MX 6 SoCs. Based on
> >> following patches, but updated/extended to work with existing
> >> support found in the kernel: - drm: imx: Support Synopsys
> >> DesignWare MIPI DSI host controller
> >> Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
> >> Cc: Fabio Estevam <festevam@xxxxxxxxx> Cc: Enric Balletbo
> >> Serra <eballetbo@xxxxxxxxx> Reviewed-by: Emil Velikov
> >> <emil.velikov@xxxxxxxxxxxxx> Tested-by: Adrian Pop
> >> <pop.adrian61@xxxxxxxxx> Tested-by: Arnaud Ferraris
> >> <arnaud.ferraris@xxxxxxxxxxxxx> Signed-off-by: Sjoerd Simons
> >> <sjoerd.simons@xxxxxxxxxxxxx> Signed-off-by: Martyn Welch
> >> <martyn.welch@xxxxxxxxxxxxx> Signed-off-by: Adrian Ratiu
> >> <adrian.ratiu@xxxxxxxxxxxxx> --- Changes since v6:
> >> - Replaced custom noop encoder with the simple drm encoder
> >> (Enric) - Added CONFIG_DRM_IMX6_MIPI_DSI depends on CONFIG_OF
> >> (Enric) - Dropped imx_mipi_dsi_register() because now it only
> >> creates the dummy encoder which can easily be done directly
> >> in imx_dsi_bind()
> >> Changes since v5:
> >> - Reword to remove unrelated device tree patch mention
> >> (Fabio) - Move pllref_clk enable/disable to bind/unbind
> >> (Ezequiel) - Fix freescale.com -> nxp.com email addresses
> >> (Fabio) - Also added myself as module author (Fabio) - Use
> >> DRM_DEV_* macros for consistency, print more error msg
> >> Changes since v4:
> >> - Split off driver-specific configuration of phy timings due
> >> to new upstream API. - Move regmap infrastructure logic to
> >> separate commit (Ezequiel) - Move dsi v1.01 layout addition
> >> to a separate commit (Ezequiel) - Minor warnings and driver
> >> name fixes
> >> Changes since v3:
> >> - Renamed platform driver to reflect it's i.MX6 only. (Fabio)
> >> Changes since v2:
> >> - Fixed commit tags. (Emil)
> >> Changes since v1:
> >> - Moved register definitions & regmap initialization into
> >> bridge module. Platform drivers get the regmap via plat_data
> >> after calling the bridge probe. (Emil)
> >> ---
> >> drivers/gpu/drm/imx/Kconfig | 8 +
> >> drivers/gpu/drm/imx/Makefile | 1 +
> >> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 391 +++++++++++++++++++++++++
> >> 3 files changed, 400 insertions(+)
> >> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
> >> diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
> >> index 207bf7409dfba..0dffc72df7922 100644
> >> --- a/drivers/gpu/drm/imx/Kconfig
> >> +++ b/drivers/gpu/drm/imx/Kconfig
> >> @@ -39,3 +39,11 @@ config DRM_IMX_HDMI
> >> depends on DRM_IMX help Choose this if you want to use
> >> HDMI on i.MX6.
> >> + +config DRM_IMX6_MIPI_DSI + tristate "Freescale i.MX6
> >> DRM MIPI DSI" + select DRM_DW_MIPI_DSI + depends on
> >> DRM_IMX + depends on OF + help + Choose this if you want
> >> to use MIPI DSI on i.MX6. diff --git
> >> a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile
> >> index 21cdcc2faabc8..9a7843c593478 100644 ---
> >> a/drivers/gpu/drm/imx/Makefile +++
> >> b/drivers/gpu/drm/imx/Makefile @@ -9,3 +9,4 @@
> >> obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o
> >> obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
> >> obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
> >> +obj-$(CONFIG_DRM_IMX6_MIPI_DSI) += dw_mipi_dsi-imx6.o diff
> >> --git a/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
> >> b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c new file mode 100644
> >> index 0000000000000..f8a0a4fe16e21 --- /dev/null +++
> >> b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c @@ -0,0 +1,391 @@ +//
> >> SPDX-License-Identifier: GPL-2.0+ +/* + * i.MX6 drm driver -
> >> MIPI DSI Host Controller + * + * Copyright (C) 2011-2015
> >> Freescale Semiconductor, Inc. + * Copyright (C) 2019-2020
> >> Collabora, Ltd. + */ + +#include <linux/clk.h> +#include
> >> <linux/component.h> +#include <linux/mfd/syscon.h> +#include
> >> <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include
> >> <linux/module.h> +#include <linux/of_device.h> +#include
> >> <linux/regmap.h> +#include <linux/videodev2.h> +#include
> >> <drm/bridge/dw_mipi_dsi.h> +#include <drm/drm_crtc_helper.h>
> >> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_of.h>
> >> +#include <drm/drm_print.h> + +#include "imx-drm.h" + +#define
> >> DSI_PWR_UP 0x04 +#define RESET
> >> 0 +#define POWERUP BIT(0) + +#define
> >> DSI_PHY_IF_CTRL 0x5c +#define
> >> PHY_IF_CTRL_RESET 0x0 + +#define DSI_PHY_TST_CTRL0
> >> 0x64 +#define PHY_TESTCLK BIT(1) +#define
> >> PHY_UNTESTCLK 0 +#define PHY_TESTCLR
> >> BIT(0) +#define PHY_UNTESTCLR 0 +
> >> +#define DSI_PHY_TST_CTRL1 0x68 +#define PHY_TESTEN
> >> BIT(16) +#define PHY_UNTESTEN 0 +#define
> >> PHY_TESTDOUT(n) (((n) & 0xff) << 8)
> >> +#define PHY_TESTDIN(n) (((n) & 0xff) <<
> >> 0) + +struct imx_mipi_dsi { + struct drm_encoder
> >> encoder; + struct device *dev; + struct regmap *mux_sel; +
> >> struct dw_mipi_dsi *mipi_dsi; + struct clk *pllref_clk; +
> >> + void __iomem *base; + unsigned int lane_mbps; +}; +
> >> +struct dphy_pll_testdin_map { + unsigned int max_mbps; +
> >> u8 testdin; +}; + +/* The table is based on 27MHz DPHY pll
> >> reference clock. */ +static const struct dphy_pll_testdin_map
> >> dptdin_map[] = { + {160, 0x04}, {180, 0x24}, {200, 0x44},
> >> {210, 0x06}, + {240, 0x26}, {250, 0x46}, {270, 0x08},
> >> {300, 0x28}, + {330, 0x48}, {360, 0x2a}, {400, 0x4a},
> >> {450, 0x0c}, + {500, 0x2c}, {550, 0x0e}, {600, 0x2e},
> >> {650, 0x10}, + {700, 0x30}, {750, 0x12}, {800, 0x32},
> >> {850, 0x14}, + {900, 0x34}, {950, 0x54}, {1000, 0x74} +};
> >> + +static inline struct imx_mipi_dsi *enc_to_dsi(struct
> >> drm_encoder *enc) +{ + return container_of(enc, struct
> >> imx_mipi_dsi, encoder); +} + +static void
> >> imx_mipi_dsi_set_ipu_di_mux(struct imx_mipi_dsi *dsi, int
> >> ipu_di) +{ + regmap_update_bits(dsi->mux_sel, IOMUXC_GPR3, +
> >> IMX6Q_GPR3_MIPI_MUX_CTL_MASK, + ipu_di
> >> << IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT); +} + +static bool
> >> imx_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder, +
> >> const struct drm_display_mode *mode, +
> >> struct drm_display_mode *adj_mode) +{ + return true; +} +
> >> +static int imx_mipi_dsi_encoder_atomic_check(struct
> >> drm_encoder *encoder, +
> >> struct drm_crtc_state *crtc_state, +
> >> struct drm_connector_state *conn) +{ + struct
> >> imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
> >> + + /* The following values are taken from
> >> dw_hdmi_imx_atomic_check */ + imx_crtc_state->bus_format
> >> = MEDIA_BUS_FMT_RGB888_1X24; +
> >> imx_crtc_state->di_hsync_pin = 2; +
> >> imx_crtc_state->di_vsync_pin = 3; + + return 0; +}
> >
> > No encoder functions please. This should be a bridge driver, the
> > encoder should be created by the i.MX display controller driver
> > itself. As that would require quite a bit of refactoring I'm OK
> > having an encoder here for the meantime, but it should be a
> > dummy one, without any operation.
>
> I am very grateful for your willingness to decrease the scope of
> work required for this series, thank you, much appreciated!
I'm sorry :-) I really wanted to make sure the end goal was expressed
clearly. We won't reach it in one go, and I don't mind the precise
direction of intermediate steps, as long as we get there eventually.
> I'll make the "unify encoder creation" patch independent of this
> series and use an empty encoder here. We can continue the bridge
> refactoring discussion for the drivers in the other patch which
> looks like it will become a series of its own :)
>
> >> +
> >> +static void imx_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
> >> +{
> >> + struct imx_mipi_dsi *dsi = enc_to_dsi(encoder);
> >> + int mux = drm_of_encoder_active_port_id(dsi->dev->of_node, encoder);
> >> +
> >> + imx_mipi_dsi_set_ipu_di_mux(dsi, mux);
> >> +}
> >> +
> >> +static void imx_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> >> +{
> >> +}
> >> +
> >> +static const struct drm_encoder_helper_funcs imx_mipi_dsi_encoder_helpers = {
> >> + .mode_fixup = imx_mipi_dsi_encoder_mode_fixup,
> >> + .commit = imx_mipi_dsi_encoder_commit,
> >> + .disable = imx_mipi_dsi_encoder_disable,
> >> + .atomic_check = imx_mipi_dsi_encoder_atomic_check,
> >> +};
> >> +
> >> +static enum drm_mode_status imx_mipi_dsi_mode_valid(void *priv_data,
> >> + const struct drm_display_mode *mode)
> >> +{
> >> + /*
> >> + * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
> >> + * register is 11-bit.
> >> + */
> >> + if (mode->hdisplay > 0x7ff)
> >> + return MODE_BAD_HVALUE;
> >> +
> >> + /*
> >> + * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
> >> + * register is 11-bit.
> >> + */
> >> + if (mode->vdisplay > 0x7ff)
> >> + return MODE_BAD_VVALUE;
> >> +
> >> + return MODE_OK;
> >> +}
> >> +
> >> +
> >> +static unsigned int max_mbps_to_testdin(unsigned int max_mbps)
> >> +{
> >> + unsigned int i;
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
> >> + if (dptdin_map[i].max_mbps == max_mbps)
> >> + return dptdin_map[i].testdin;
> >> +
> >> + return -EINVAL;
> >> +}
> >> +
> >> +static inline void dsi_write(struct imx_mipi_dsi *dsi, u32 reg, u32 val)
> >> +{
> >> + writel(val, dsi->base + reg);
> >> +}
> >> +
> >> +static int imx_mipi_dsi_phy_init(void *priv_data)
> >> +{
> >> + struct imx_mipi_dsi *dsi = priv_data;
> >> + int testdin;
> >> +
> >> + testdin = max_mbps_to_testdin(dsi->lane_mbps);
> >> + if (testdin < 0) {
> >> + DRM_DEV_ERROR(dsi->dev,
> >> + "failed to get testdin for %dmbps lane clock\n",
> >> + dsi->lane_mbps);
> >> + return testdin;
> >> + }
> >> +
> >> + dsi_write(dsi, DSI_PHY_IF_CTRL, PHY_IF_CTRL_RESET);
> >> + dsi_write(dsi, DSI_PWR_UP, POWERUP);
> >> +
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> >> + PHY_TESTDIN(0x44));
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> >> + PHY_TESTDIN(testdin));
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> >> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int imx_mipi_dsi_get_lane_mbps(void *priv_data,
> >> + const struct drm_display_mode *mode,
> >> + unsigned long mode_flags, u32 lanes,
> >> + u32 format, unsigned int *lane_mbps)
> >> +{
> >> + struct imx_mipi_dsi *dsi = priv_data;
> >> + int bpp;
> >> + unsigned int i, target_mbps, mpclk;
> >> + unsigned long pllref;
> >> +
> >> + bpp = mipi_dsi_pixel_format_to_bpp(format);
> >> + if (bpp < 0) {
> >> + DRM_DEV_ERROR(dsi->dev, "failed to get bpp for format %d: %d\n",
> >> + format, bpp);
> >> + return bpp;
> >> + }
> >> +
> >> + pllref = clk_get_rate(dsi->pllref_clk);
> >> + if (pllref != 27000000)
> >> + DRM_WARN("DSI pllref_clk not set to 27Mhz\n");
> >> +
> >> + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
> >> + if (mpclk) {
> >> + /* take 1/0.7 blanking overhead into consideration */
> >> + target_mbps = (mpclk * (bpp / lanes) * 10) / 7;
> >> + } else {
> >> + DRM_DEV_ERROR(dsi->dev, "use default 1Gbps DPHY pll clock\n");
> >> + target_mbps = 1000;
> >> + }
> >> +
> >> + DRM_DEV_DEBUG(dsi->dev, "target pllref_clk frequency is %uMbps\n",
> >> + target_mbps);
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
> >> + if (target_mbps < dptdin_map[i].max_mbps) {
> >> + *lane_mbps = dptdin_map[i].max_mbps;
> >> + dsi->lane_mbps = *lane_mbps;
> >> + DRM_DEV_DEBUG(dsi->dev,
> >> + "real pllref_clk frequency is %uMbps\n",
> >> + *lane_mbps);
> >> + return 0;
> >> + }
> >> + }
> >> +
> >> + DRM_DEV_ERROR(dsi->dev, "DPHY clock frequency %uMbps is out of range\n",
> >> + target_mbps);
> >> +
> >> + return -EINVAL;
> >> +}
> >> +
> >> +static int
> >> +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
> >> + struct dw_mipi_dsi_dphy_timing *timing)
> >> +{
> >> + timing->clk_hs2lp = 0x40;
> >> + timing->clk_lp2hs = 0x40;
> >> + timing->data_hs2lp = 0x40;
> >> + timing->data_lp2hs = 0x40;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_imx6_phy_ops = {
> >> + .init = imx_mipi_dsi_phy_init,
> >> + .get_lane_mbps = imx_mipi_dsi_get_lane_mbps,
> >> + .get_timing = dw_mipi_dsi_phy_get_timing,
> >> +};
> >> +
> >> +static struct dw_mipi_dsi_plat_data imx6q_mipi_dsi_drv_data = {
> >> + .max_data_lanes = 2,
> >> + .mode_valid = imx_mipi_dsi_mode_valid,
> >> + .phy_ops = &dw_mipi_dsi_imx6_phy_ops,
> >> +};
> >> +
> >> +static const struct of_device_id imx_dsi_dt_ids[] = {
> >> + {
> >> + .compatible = "fsl,imx6q-mipi-dsi",
> >> + .data = &imx6q_mipi_dsi_drv_data,
> >> + },
> >> + { /* sentinel */ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, imx_dsi_dt_ids);
> >> +
> >> +static int imx_mipi_dsi_bind(struct device *dev, struct device *master,
> >> + void *data)
> >> +{
> >> + struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
> >> + struct drm_device *drm = data;
> >> + int ret;
> >> +
> >> + ret = clk_prepare_enable(dsi->pllref_clk);
> >> + if (ret) {
> >> + DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = imx_drm_create_encoder(drm, &dsi->encoder, dsi->dev->of_node);
> >> + if (ret) {
> >> + DRM_DEV_ERROR(dsi->dev, "failed to create drm encoder\n");
> >> + return ret;
> >> + }
> >> +
> >> + drm_encoder_helper_add(&dsi->encoder, &imx_mipi_dsi_encoder_helpers);
> >> +
> >> + ret = dw_mipi_dsi_bind(dsi->mipi_dsi, &dsi->encoder);
> >> + if (ret) {
> >> + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void imx_mipi_dsi_unbind(struct device *dev, struct device *master,
> >> + void *data)
> >> +{
> >> + struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
> >> +
> >> + dw_mipi_dsi_unbind(dsi->mipi_dsi);
> >> +
> >> + clk_disable_unprepare(dsi->pllref_clk);
> >> +}
> >> +
> >> +static const struct component_ops imx_mipi_dsi_ops = {
> >> + .bind = imx_mipi_dsi_bind,
> >> + .unbind = imx_mipi_dsi_unbind,
> >> +};
> >> +
> >> +static int imx_mipi_dsi_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + const struct of_device_id *of_id = of_match_device(imx_dsi_dt_ids, dev);
> >> + struct dw_mipi_dsi_plat_data *pdata = (struct dw_mipi_dsi_plat_data *) of_id->data;
> >> + struct imx_mipi_dsi *dsi;
> >> + struct resource *res;
> >> + int ret;
> >> +
> >> + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> >> + if (!dsi)
> >> + return -ENOMEM;
> >> +
> >> + dsi->dev = dev;
> >> +
> >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> + dsi->base = devm_ioremap_resource(dev, res);
> >> + if (IS_ERR(dsi->base)) {
> >> + ret = PTR_ERR(dsi->base);
> >> + DRM_DEV_ERROR(dev, "Unable to get dsi registers: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + dsi->pllref_clk = devm_clk_get(dev, "ref");
> >> + if (IS_ERR(dsi->pllref_clk)) {
> >> + ret = PTR_ERR(dsi->pllref_clk);
> >> + DRM_DEV_ERROR(dev, "Unable to get pllref_clk: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr");
> >> + if (IS_ERR(dsi->mux_sel)) {
> >> + ret = PTR_ERR(dsi->mux_sel);
> >> + DRM_DEV_ERROR(dev, "Failed to get GPR regmap: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + dev_set_drvdata(dev, dsi);
> >> +
> >> + imx6q_mipi_dsi_drv_data.base = dsi->base;
> >> + imx6q_mipi_dsi_drv_data.priv_data = dsi;
> >> +
> >> + dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata);
> >> + if (IS_ERR(dsi->mipi_dsi)) {
> >> + ret = PTR_ERR(dsi->mipi_dsi);
> >> + DRM_DEV_ERROR(dev, "Failed to probe DW DSI host: %d\n", ret);
> >> + goto err_clkdisable;
> >> + }
> >> +
> >> + return component_add(&pdev->dev, &imx_mipi_dsi_ops);
> >> +
> >> +err_clkdisable:
> >> + clk_disable_unprepare(dsi->pllref_clk);
> >> + return ret;
> >> +}
> >> +
> >> +static int imx_mipi_dsi_remove(struct platform_device *pdev)
> >> +{
> >> + component_del(&pdev->dev, &imx_mipi_dsi_ops);
> >> + return 0;
> >> +}
> >> +
> >> +static struct platform_driver imx_mipi_dsi_driver = {
> >> + .probe = imx_mipi_dsi_probe,
> >> + .remove = imx_mipi_dsi_remove,
> >> + .driver = {
> >> + .of_match_table = imx_dsi_dt_ids,
> >> + .name = "dw-mipi-dsi-imx6",
> >> + },
> >> +};
> >> +module_platform_driver(imx_mipi_dsi_driver);
> >> +
> >> +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver");
> >> +MODULE_AUTHOR("Liu Ying <victor.liu@xxxxxxx>");
> >> +MODULE_AUTHOR("Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>");
> >> +MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
