Re: [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 15, 2020 at 02:47:45PM +0530, Jishnu Prakash wrote:
> Add documentation for PMIC7 ADC peripheral.
> For the PMIC7-type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b.
> Of these, only the ADC peripheral on PMK8350 is exposed directly to SW.
> If SW needs to communicate with ADCs on other PMICs, it specifies the
> PMIC to PMK8350 through the newly added SID register and communication
> between PMK8350 ADC and other PMIC ADCs is carried out through
> PBS(Programmable Boot Sequence) at the firmware level.
> 
> In addition, add definitions for ADC channels and virtual channel
> definitions (combination of ADC channel number and PMIC SID number)
> per PMIC, to be used by ADC clients for PMIC7.
> 
> Signed-off-by: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
> ---
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml           | 52 +++++++++++--
>  include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h    | 67 ++++++++++++++++
>  include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h   | 88 ++++++++++++++++++++++
>  include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h   | 46 +++++++++++
>  include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h   | 28 +++++++
>  include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h   | 28 +++++++
>  include/dt-bindings/iio/qcom,spmi-vadc.h           | 78 ++++++++++++++++++-
>  7 files changed, 380 insertions(+), 7 deletions(-)
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index 8273981..62aa311 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -13,7 +13,7 @@ maintainers:
>  description: |
>    SPMI PMIC voltage ADC (VADC) provides interface to clients to read
>    voltage. The VADC is a 15-bit sigma-delta ADC.
> -  SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> +  SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
>    voltage. The VADC is a 16-bit sigma-delta ADC.
>  
>  properties:
> @@ -28,6 +28,7 @@ properties:
>            - qcom,spmi-vadc
>            - qcom,spmi-adc5
>            - qcom,spmi-adc-rev2
> +          - qcom,spmi-adc7
>  
>    reg:
>      description: VADC base address in the SPMI PMIC register map
> @@ -70,6 +71,8 @@ patternProperties:
>          description: |
>            ADC channel number.
>            See include/dt-bindings/iio/qcom,spmi-vadc.h
> +          For PMIC7 ADC, the channel numbers are specified separately per PMIC
> +          in the PMIC-specific files in include/dt-bindings/iio/.
>  
>        label:
>          $ref: /schemas/types.yaml#/definitions/string
> @@ -89,6 +92,8 @@ patternProperties:
>                of 512 will be used.
>              - For compatible property "qcom,spmi-adc5", valid values are 250, 420
>                and 840. If property is not found, default value of 840 is used.
> +            - For compatible property "qcom,spmi-adc7", valid values are 85, 340
> +              and 1360. If property is not found, default value of 1360 is used.

We express constraints in schema now, don't duplicate with free form 
text.

>              - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
>                512 and 1024. If property is not present, default value is 1024.
>  
> @@ -122,11 +127,11 @@ patternProperties:
>                channel calibration. If property is not found, channel will be
>                calibrated with 0.625V and 1.25V reference channels, also
>                known as absolute calibration.
> -            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> -              if this property is specified VADC will use the VDD reference (1.875V)
> -              and GND for channel calibration. If property is not found, channel
> -              will be calibrated with 0V and 1.25V reference channels, also known
> -              as absolute calibration.
> +            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
> +              "qcom,spmi-adc-rev2", if this property is specified VADC will use
> +              the VDD reference (1.875V) and GND for channel calibration. If
> +              property is not found, channel will be calibrated with 0V and 1.25V
> +              reference channels, also known as absolute calibration.
>          type: boolean
>  
>        qcom,hw-settle-time:
> @@ -149,6 +154,12 @@ patternProperties:
>                Certain controller digital versions have valid values of
>                15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
>                If property is not found, channel will use 15us.
> +            - For compatible property "qcom,spmi-adc7", delay = 15us for
> +              value 0, 100us * (value) for values < 8, 1ms for value 8
> +              and 2ms * (value - 8) otherwise.
> +              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000,
> +              4000, 8000, 16000, 32000, 64000, 128000 us.
> +              If property is not found, channel will use 15us.
>  
>        qcom,avg-samples:
>          $ref: /schemas/types.yaml#/definitions/uint32
> @@ -160,6 +171,9 @@ patternProperties:
>              - For compatible property "qcom,spmi-vadc", valid values
>                are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
>                If property is not found, 1 sample will be used.
> +            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7"
> +              and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16.
> +              If property is not found, 1 sample will be used.
>  
>      required:
>        - reg
> @@ -244,6 +258,32 @@ allOf:
>                  enum: [ 1, 2, 4, 8, 16 ]
>                  default: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-adc7
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-fx]+$":

'x' should not be in unit-addresses.

> +          properties:
> +            qcom,decimation:
> +              items:

Not an array, so 'items' doesn't make sense here.

> +                enum: [ 85, 340, 1360 ]
> +                default: 1360
> +
> +            qcom,hw-settle-time:
> +              items:
> +                enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000,
> +                        8000, 16000, 32000, 64000, 128000 ]
> +                default: 15
> +
> +            qcom,avg-samples:
> +              items:
> +                enum: [ 1, 2, 4, 8, 16 ]
> +                default: 1
> +
>  examples:
>    - |
>      spmi_bus {



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux