STM32 Extended TrustZone Protection controller act like a firewall on the platform bus. Depending of its configuration devices could be accessible by the TrustZone, the co-processor or the non-secure world. ETZPC configuration could evolve at runtime for example to switch a device from non-secure world to co-processor. The series introduce 'firewall' helpers to handle the new devices-tree properties. These properties are not dedicated to ETZPC and will be reused for STM32 next generation of bus controller. Benjamin Gaignard (5): dt-bindings: bus: Add firewall bindings bus: stm32: Introduce firewall controller helpers dt-bindings: bus: Add STM32 ETZPC firewall controller bus: stm32: Add stm32 ETZPC firewall bus controller ARM: dts: stm32: Use ETZPC firewall bus .../bindings/bus/stm32/firewall-consumer.yaml | 25 ++ .../bindings/bus/stm32/firewall-provider.yaml | 18 ++ .../bindings/bus/stm32/st,stm32-etzpc.yaml | 46 ++++ arch/arm/boot/dts/stm32mp151.dtsi | 7 +- drivers/bus/Kconfig | 2 + drivers/bus/Makefile | 2 + drivers/bus/stm32/Kconfig | 11 + drivers/bus/stm32/Makefile | 2 + drivers/bus/stm32/firewall.c | 266 +++++++++++++++++++++ drivers/bus/stm32/firewall.h | 75 ++++++ drivers/bus/stm32/stm32-etzpc.c | 160 +++++++++++++ include/dt-bindings/bus/stm32/stm32-etzpc.h | 90 +++++++ 12 files changed, 702 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/stm32/firewall-consumer.yaml create mode 100644 Documentation/devicetree/bindings/bus/stm32/firewall-provider.yaml create mode 100644 Documentation/devicetree/bindings/bus/stm32/st,stm32-etzpc.yaml create mode 100644 drivers/bus/stm32/Kconfig create mode 100644 drivers/bus/stm32/Makefile create mode 100644 drivers/bus/stm32/firewall.c create mode 100644 drivers/bus/stm32/firewall.h create mode 100644 drivers/bus/stm32/stm32-etzpc.c create mode 100644 include/dt-bindings/bus/stm32/stm32-etzpc.h -- 2.15.0
