Re: [PATCH v3 00/13] ARM/DT: edma: IP configuration from hardware and cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 05/19/2014 04:06 PM, Sekhar Nori wrote:
> On Friday 16 May 2014 05:47 PM, Peter Ujfalusi wrote:
>> Hi,
>>
>> Changes since v2:
>> - Comments from Sekhar and Arnd has been addressed best as I could.
>> - Use the CCCFG information in all cases instead of pdata provided information
>> - To achieve this I needed to do a bit more cleanup in this series
>> - In the documentation patch, retrain the old properties for reference
>> - Cleanups in the old davinci board files and removing edma_soc_info members
>>
>> Changes sicne v1:
>> - added missing patch to remove the memset from edma_of_parse_dt()
>>
>> We are requesting redundant information via DT for the driver since the very same
>> data is available in the HW: by reading and decoding the content of CCCFG
>> register we can get:
>> Number of channels: NUM_DMACH
>> Number of regions: NUM_REGN
>> Number of slots (PaRAM sets): NUM_PAENTRY
>> Number of TC/EQ: NUM_EVQUE
>>
>> So these does not need to be provided by the DT binding.
>>
>> The driver will no longer look for these properties from DT and they can be
>> removed from the binding documentation and from the dtsi files as well.
>> The change will not introduce regression when new kernel is booted using older
>> DTB (since we just ignore the mentioned properties).
> 
> Applied all patches and pushed to branch v3.16/edma of:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
> 
> Since the patches did not apply cleanly, please verify. I tested on
> DA850 EVM using MMC/SD as EDMA user.

The patches in this series looks OK in your branch.
However I can not find the following commits in there, which I have in linux-next:
c689a7b79c28 Merge remote-tracking branch 'slave-dma/next'
cdae05a0f0f7 dmaengine: edma: Make reading the position of active channels work
cf7eb979116c ARM: common: edma: Fix xbar mapping
232b223d8281 dmaengine: edma: Set DMA_CYCLIC capability flag
7cf2af90cd51 arm: common: edma: Save the number of event queues/TCs

They might come via different route...

> 
> I will wait to get acks from DT maintainers before sending to ARM-SoC.
> 
> Thanks,
> Sekhar
> 


Thanks,
Péter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux