Re: [PATCH v5 5/5] media: dt-bindings: media: i2c: convert ov5645 bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 06, 2020 at 08:43:46PM +0300, Laurent Pinchart wrote:
> Hi Prabhakar,
> 
> Thank you for the patch.
> 
> On Mon, Apr 06, 2020 at 05:42:41PM +0100, Lad Prabhakar wrote:
> > Convert ov5645 bindings to json-schema.
> > 
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/media/i2c/ov5645.txt  |  52 --------
> >  .../devicetree/bindings/media/i2c/ov5645.yaml | 126 ++++++++++++++++++
> >  2 files changed, 126 insertions(+), 52 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > deleted file mode 100644
> > index a55bb728ea48..000000000000
> > --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > +++ /dev/null
> > @@ -1,52 +0,0 @@
> > -* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
> > -
> > -The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
> > -an active array size of 2592H x 1944V. It is programmable through a serial I2C
> > -interface.
> > -
> > -Required Properties:
> > -- compatible: Value should be "ovti,ov5645".
> > -- clocks: Reference to the xclk clock.
> > -- clock-names: Should be "xclk".
> > -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
> > -  to the hardware pin PWDNB which is physically active low.
> > -- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> > -  the hardware pin RESETB.
> > -- vdddo-supply: Chip digital IO regulator.
> > -- vdda-supply: Chip analog regulator.
> > -- vddd-supply: Chip digital core regulator.
> > -
> > -The device node must contain one 'port' child node for its digital output
> > -video port, in accordance with the video interface bindings defined in
> > -Documentation/devicetree/bindings/media/video-interfaces.txt.
> > -
> > -Example:
> > -
> > -	&i2c1 {
> > -		...
> > -
> > -		ov5645: ov5645@3c {
> > -			compatible = "ovti,ov5645";
> > -			reg = <0x3c>;
> > -
> > -			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> > -			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
> > -			pinctrl-names = "default";
> > -			pinctrl-0 = <&camera_rear_default>;
> > -
> > -			clocks = <&clks 200>;
> > -			clock-names = "xclk";
> > -
> > -			vdddo-supply = <&camera_dovdd_1v8>;
> > -			vdda-supply = <&camera_avdd_2v8>;
> > -			vddd-supply = <&camera_dvdd_1v2>;
> > -
> > -			port {
> > -				ov5645_ep: endpoint {
> > -					clock-lanes = <1>;
> > -					data-lanes = <0 2>;
> > -					remote-endpoint = <&csi0_ep>;
> > -				};
> > -			};
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
> > new file mode 100644
> > index 000000000000..d5cdcf9a1c76
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
> > @@ -0,0 +1,126 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ov5645.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision 1/4-Inch 5MP CMOS Digital Image Sensor
> > +
> > +maintainers:
> > +  - Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > +
> > +description: |-
> > + The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
> > + an active array size of 2592H x 1944V. It is programmable through a serial I2C
> > + interface.
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov5645
> > +
> > +  reg:
> > +    description: I2C device address
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description: External clock frequency should range between 6MHz to 27MHz.
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: xclk
> > +
> > +  enable-gpios:
> > +    description: |-
> > +      Chip enable GPIO. This corresponds to the hardware pin PWDNB which is
> > +      physically active low.
> > +
> > +  reset-gpios:
> > +    description: Chip reset GPIO. This corresponds to the hardware pin RESETB.
> > +
> > +  vdddo-supply:
> > +    description: Chip digital IO regulator.
> > +
> > +  vdda-supply:
> > +    description: Chip analog regulator.
> > +
> > +  vddd-supply:
> > +    description: Chip digital core regulator.
> > +
> > +  # See ../video-interfaces.txt for more details
> > +  port:
> > +    type: object
> > +    properties:
> > +      endpoint:
> > +        type: object
> > +
> > +        properties:
> > +          data-lanes:
> 
> Don't you need
> 
> 		minItems: 1
> 		maxItems: 2
> 
> here ?

Yes.

> > +            description: |-
> > +              The sensor supports either one-lane, or two-lane operation.
> > +              For one-lane operation the property must be set to <1> and
> > +              for two-lane operation the property must be set to <1 2>.
> > +            items:
> > +              - const: 1
> > +              - const: 2
> > +
> > +          clock-lanes:
> 
> Same here,
> 
> 		maxItems: 1
> 
> ?

No, because the default is number of entries in 'items'.

> 
> > +            description:
> > +              should be set to <0> (clock lane on hardware lane 0).
> 
> I think you can drop the description, with the items below it's clear
> that the value has to be <0>.
> 
> > +            items:
> > +              - const: 0
> > +
> > +          remote-endpoint: true
> 
> Should this be
> 
>              remote-endpoint:
> 	       $ref: /schemas/types.yaml#/definitions/phandle

No, we can assume this has a type definition already.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux