Convert ov5645 bindings to json-schema.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/ov5645.txt | 52 --------
.../devicetree/bindings/media/i2c/ov5645.yaml | 126 ++++++++++++++++++
2 files changed, 126 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
deleted file mode 100644
index a55bb728ea48..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
-
-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a serial I2C
-interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov5645".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
- to the hardware pin PWDNB which is physically active low.
-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
- the hardware pin RESETB.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
- &i2c1 {
- ...
-
- ov5645: ov5645@3c {
- compatible = "ovti,ov5645";
- reg = <0x3c>;
-
- enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&camera_rear_default>;
-
- clocks = <&clks 200>;
- clock-names = "xclk";
-
- vdddo-supply = <&camera_dovdd_1v8>;
- vdda-supply = <&camera_avdd_2v8>;
- vddd-supply = <&camera_dvdd_1v2>;
-
- port {
- ov5645_ep: endpoint {
- clock-lanes = <1>;
- data-lanes = <0 2>;
- remote-endpoint = <&csi0_ep>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
new file mode 100644
index 000000000000..d5cdcf9a1c76
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision 1/4-Inch 5MP CMOS Digital Image Sensor
+
+maintainers:
+ - Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
+
+description: |-
+ The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
+ an active array size of 2592H x 1944V. It is programmable through a serial I2C
+ interface.
+
+properties:
+ compatible:
+ const: ovti,ov5645
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ description: External clock frequency should range between 6MHz to 27MHz.
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xclk
+
+ enable-gpios:
+ description: |-
+ Chip enable GPIO. This corresponds to the hardware pin PWDNB which is
+ physically active low.
+
+ reset-gpios:
+ description: Chip reset GPIO. This corresponds to the hardware pin RESETB.
+
+ vdddo-supply:
+ description: Chip digital IO regulator.
+
+ vdda-supply:
+ description: Chip analog regulator.
+
+ vddd-supply:
+ description: Chip digital core regulator.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either one-lane, or two-lane operation.
+ For one-lane operation the property must be set to <1> and
+ for two-lane operation the property must be set to <1 2>.
+ items:
+ - const: 1
+ - const: 2
+
+ clock-lanes:
+ description:
+ should be set to <0> (clock lane on hardware lane 0).
+ items:
+ - const: 0
+
+ remote-endpoint: true
+
+ required:
+ - data-lanes
+ - clock-lanes
+ - remote-endpoint
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - enable-gpios
+ - reset-gpios
+ - vdddo-supply
+ - vdda-supply
+ - vddd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5645: sensor@3c {
+ compatible = "ovti,ov5645";
+ reg = <0x3c>;
+ clocks = <&ov5645_cl>;
+ clock-names = "xclk";
+ enable-gpios = <&gpio1 6 /* GPIO_ACTIVE_HIGH */>;
+ reset-gpios = <&gpio5 20 /* GPIO_ACTIVE_LOW */>;
+ vdddo-supply = <&camera_dovdd_1v8>;
+ vdda-supply = <&camera_avdd_2v8>;
+ vddd-supply = <&camera_dvdd_1v2>;
+
+ port {
+ ov5645_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+...
--
2.20.1
