Re: [PATCH v3 2/3] iio: DAC extension for ltc2634-12/10/8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Uwe,

On 15/4/2020 3:00 pm, Uwe Kleine-König wrote:
On Wed, Apr 15, 2020 at 07:56:03AM +0800, Chris Ruehl wrote:
This patch add support for Analog Devices (Linear Technology)
LTC2634 Quad 12-/10-/8-Bit Rail-to-Rail DAC.
The SPI functionality based on them from LTC2632 therefor
add the definitions only and update the Kconfig.

V2:
Send the documentation fix in a extra patch
Kconfig simplify the driver description, details to the help text
ltc2632.txt add to this patch-set (prepare to convert to yaml)

V3:
Consistens decimal separator in help text

The description about how the patch evolves usually goes below the ---
and S-o-b area. This way it doesn't make it into the commit history.

Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
---
  .../devicetree/bindings/iio/dac/ltc2632.txt   |  8 ++-
  drivers/iio/dac/Kconfig                       |  6 +-
  drivers/iio/dac/ltc2632.c                     | 60 +++++++++++++++++++
  3 files changed, 70 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
index 338c3220f01a..1ab9570cf219 100644
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
@@ -1,4 +1,4 @@
-Linear Technology LTC2632/2636 DAC
+Linear Technology LTC2632/2634/2636 DAC
Required properties:
   - compatible: Has to contain one of the following:
@@ -8,6 +8,12 @@ Required properties:
  	lltc,ltc2632-h12
  	lltc,ltc2632-h10
  	lltc,ltc2632-h8
+	lltc,ltc2634-l12
+	lltc,ltc2634-l10
+	lltc,ltc2634-l8
+	lltc,ltc2634-h12
+	lltc,ltc2634-h10
+	lltc,ltc2634-h8
  	lltc,ltc2636-l12
  	lltc,ltc2636-l10
  	lltc,ltc2636-l8
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 93744011b63f..aee13ced6ddf 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -279,12 +279,12 @@ config LTC1660
  	  module will be called ltc1660.
config LTC2632
-	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
+	tristate "Linear Technology LTC2632-12/10/8 and similar DAC spi driver"
  	depends on SPI
  	help
  	  Say yes here to build support for Linear Technology
-	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
-	  LTC2636-8 converters (DAC).
+	  LTC2632, LTC2634 and LTC2636 DAC resolution 12/10/8 bit
+	  low 0-2.5V and high 0-4.096V range converters.

The naming pattern seems to be:

	LTC263ab-cc

with:

	a = 2 -> 2 channels
	a = 4 -> 4 channels
	a = 6 -> 8 channels

	b = L -> Vref = 2.5V
	b = H -> Vref = 4.096V

	cc = 8 -> 8 bit precision
	cc = 10 -> 10 bit precision
	cc = 12 -> 12 bit precision

Would it make sense to document this somewhere?

But as this is (somewhat) orthogonal to this patch:

Acked-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

Best regards
Uwe


General I think that is a good solution to be precise in the description.
Update the device-tree lltc,ltc2632.yaml with this kind of
information, its logically the better place - IMHO

Kind regards
Chris

--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521

Disclaimer: https://www.gtsys.com.hk/email/classified.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux