[PATCH] phy: qcom: qmp: Add SM8250 UFS PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SM8250 UFS PHY can run off the same initialization sequence as
SM8150, but add the compatible to allow future changes.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
 drivers/phy/qualcomm/phy-qcom-qmp.c                    | 3 +++
 2 files changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 54d6f8d43508..5ff9e7ab6001 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -19,6 +19,7 @@ Required properties:
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
 	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
 	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
+	       "qcom,sm8250-qmp-ufs-phy" for UFS QMP phy on sm8250.
 
 - reg:
   - index 0: address and length of register set for PHY's common
@@ -69,6 +70,8 @@ Required properties:
 			"ref", "ref_aux".
 		For "qcom,sm8150-qmp-ufs-phy" must contain:
 			"ref", "ref_aux".
+		For "qcom,sm8250-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -103,6 +106,8 @@ Required properties:
 			"ufsphy".
 		For "qcom,sm8150-qmp-ufs-phy": must contain:
 			"ufsphy".
+		For "qcom,sm8250-qmp-ufs-phy": must contain:
+			"ufsphy".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index c190406246ab..50cbcdce3680 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -2536,6 +2536,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8150-qmp-ufs-phy",
 		.data = &sm8150_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sm8250-qmp-ufs-phy",
+		.data = &sm8150_ufsphy_cfg,
 	},
 	{ },
 };
-- 
2.24.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux