This series adds support for all "older" SoCs to the meson-ee-pwrc driver. I wanted to compare as much as I could between my Meson8b EC-100 (Endless Mini) and the Le Potato board so I added support for GXBB, GXL and GXM as well as for the SoCs that I'm actually working on. I will send the ARM64 dts patches once all of this is reviewed and merged. @Neil: I would like you to review especially the GX dt-binding patch. The old GX driver seems to include the same reset lines as G12A *plus* "dvin". You probably know best whether that's needed or not - for now I decided to keep it (as this is what "works" with the old pwrc driver). Also I decided to use your copyright in meson-gxbb-power.h since it's a shameless copy of meson-g12a-power.h with s/G12A/GXBB/g I successfully tested the Meson8b part on EC-100 where u-boot does not initialize the VPU controller. So this the board where I have been struggling most. Martin Blumenstingl (4): dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2 dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2 soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs .../bindings/power/amlogic,meson-ee-pwrc.yaml | 102 +++++++++++++++--- drivers/soc/amlogic/meson-ee-pwrc.c | 98 ++++++++++++++++- include/dt-bindings/power/meson-gxbb-power.h | 13 +++ include/dt-bindings/power/meson8-power.h | 13 +++ 4 files changed, 204 insertions(+), 22 deletions(-) create mode 100644 include/dt-bindings/power/meson-gxbb-power.h create mode 100644 include/dt-bindings/power/meson8-power.h -- 2.26.0
