Currently, the Versaclock driver is only expecting one instance and
uses hard-coded names for the various clock names. Unfortunately,
this is a problem when there is more than one instance of the driver,
because the subsequent instantiations of the driver use the identical
name. Each clock after the fist fails to load, because the clock
subsystem cannot handle two clocks with identical name.
This patch removes the hard-coded name arrays and uses kasprintf to
assign clock names based on names of their respective node and parent
node which gives each clock a unique identifying name.
For a verasaclock node with a name like:
versaclock5: versaclock_som@6a
The updated clock names would appear like:
versaclock_som.mux
versaclock_som.out0_sel_i2cb
versaclock_som.pfd
versaclock_som.pll
versaclock_som.fod3
versaclock_som.out4
versaclock_som.fod2
versaclock_som.out3
versaclock_som.fod1
versaclock_som.out2
versaclock_som.fod0
versaclock_som.out1
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index fa96659f8023..6e4b09f1f074 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -161,30 +161,6 @@ struct vc5_driver_data {
struct vc5_hw_data clk_out[VC5_MAX_CLK_OUT_NUM];
};
-static const char * const vc5_mux_names[] = {
- "mux"
-};
-
-static const char * const vc5_dbl_names[] = {
- "dbl"
-};
-
-static const char * const vc5_pfd_names[] = {
- "pfd"
-};
-
-static const char * const vc5_pll_names[] = {
- "pll"
-};
-
-static const char * const vc5_fod_names[] = {
- "fod0", "fod1", "fod2", "fod3",
-};
-
-static const char * const vc5_clk_out_names[] = {
- "out0_sel_i2cb", "out1", "out2", "out3", "out4",
-};
-
/*
* VersaClock5 i2c regmap
*/
@@ -750,12 +726,13 @@ static int vc5_probe(struct i2c_client *client,
return -EINVAL;
}
- init.name = vc5_mux_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node);
init.ops = &vc5_mux_ops;
init.flags = 0;
init.parent_names = parent_names;
vc5->clk_mux.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -764,13 +741,16 @@ static int vc5_probe(struct i2c_client *client,
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) {
/* Register frequency doubler */
memset(&init, 0, sizeof(init));
- init.name = vc5_dbl_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl",
+ client->dev.of_node);
init.ops = &vc5_dbl_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_mux_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_mul.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
@@ -780,16 +760,18 @@ static int vc5_probe(struct i2c_client *client,
/* Register PFD */
memset(&init, 0, sizeof(init));
- init.name = vc5_pfd_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node);
init.ops = &vc5_pfd_ops;
init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL)
- init.parent_names = vc5_dbl_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mul);
else
- init.parent_names = vc5_mux_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_pfd.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -797,15 +779,17 @@ static int vc5_probe(struct i2c_client *client,
/* Register PLL */
memset(&init, 0, sizeof(init));
- init.name = vc5_pll_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node);
init.ops = &vc5_pll_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_pfd_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pfd);
init.num_parents = 1;
vc5->clk_pll.num = 0;
vc5->clk_pll.vc5 = vc5;
vc5->clk_pll.hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n", init.name);
goto err_clk;
@@ -815,15 +799,18 @@ static int vc5_probe(struct i2c_client *client,
for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
idx = vc5_map_index_to_output(vc5->chip_info->model, n);
memset(&init, 0, sizeof(init));
- init.name = vc5_fod_names[idx];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d",
+ client->dev.of_node, idx);
init.ops = &vc5_fod_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_pll_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw);
init.num_parents = 1;
vc5->clk_fod[n].num = idx;
vc5->clk_fod[n].vc5 = vc5;
vc5->clk_fod[n].hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
@@ -833,15 +820,18 @@ static int vc5_probe(struct i2c_client *client,
/* Register MUX-connected OUT0_I2C_SELB output */
memset(&init, 0, sizeof(init));
- init.name = vc5_clk_out_names[0];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb",
+ client->dev.of_node);
init.ops = &vc5_clk_out_ops;
init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = vc5_mux_names;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
init.num_parents = 1;
vc5->clk_out[0].num = idx;
vc5->clk_out[0].vc5 = vc5;
vc5->clk_out[0].hw.init = &init;
ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
@@ -851,14 +841,15 @@ static int vc5_probe(struct i2c_client *client,
/* Register FOD-connected OUTx outputs */
for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
- parent_names[0] = vc5_fod_names[idx];
+ parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw);
if (n == 1)
- parent_names[1] = vc5_mux_names[0];
+ parent_names[1] = clk_hw_get_name(&vc5->clk_mux);
else
- parent_names[1] = vc5_clk_out_names[n - 1];
+ parent_names[1] = clk_hw_get_name(&vc5->clk_out[n-1].hw);
memset(&init, 0, sizeof(init));
- init.name = vc5_clk_out_names[idx + 1];
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d",
+ client->dev.of_node, idx + 1);
init.ops = &vc5_clk_out_ops;
init.flags = CLK_SET_RATE_PARENT;
init.parent_names = parent_names;
@@ -868,6 +859,7 @@ static int vc5_probe(struct i2c_client *client,
vc5->clk_out[n].hw.init = &init;
ret = devm_clk_hw_register(&client->dev,
&vc5->clk_out[n].hw);
+ kfree(init.name); /* clock framework made a copy of the name */
if (ret) {
dev_err(&client->dev, "unable to register %s\n",
init.name);
--
2.25.1
