Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Peter Rosin <peda@xxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
.../display/panel/sharp,lq150x1lg11.txt | 36 ------------
.../display/panel/sharp,lq150x1lg11.yaml | 58 +++++++++++++++++++
2 files changed, 58 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
deleted file mode 100644
index 0f57c3143506..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Sharp 15" LQ150X1LG11 XGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq150x1lg11"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-Optional properties:
-- backlight: phandle of the backlight device
-- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
-- sellvds-gpios: a single GPIO for the SELLVDS pin.
-
-If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
-pins are assumed to be handled appropriately by the hardware.
-
-Example:
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 100000>; /* VBR */
-
- brightness-levels = <0 20 40 60 80 100>;
- default-brightness-level = <2>;
-
- power-supply = <&vdd_12v_reg>; /* VDD */
- enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */
- };
-
- panel {
- compatible = "sharp,lq150x1lg11";
-
- power-supply = <&vcc_3v3_reg>; /* VCC */
-
- backlight = <&backlight>;
- rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
- sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
- };
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 000000000000..92f2d12f4f4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+ - Peter Rosin <peda@xxxxxxxxxx>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,lq150x1lg11
+
+ power-supply: true
+ backlight: true
+
+ rlud-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the RL/UD (rotate 180 degrees) pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+ sellvds-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the SELLVDS pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+required:
+ - compatible
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ panel {
+ compatible = "sharp,lq150x1lg11";
+
+ power-supply = <&vcc_3v3_reg>; /* VCC */
+
+ backlight = <&backlight>;
+ rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
+ sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+ };
+
+...
--
2.20.1
