For samsung there was two AMOLED panels with the same description. Collect them in one binding file. Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> --- .../panel/samsung,amoled-mipi-dsi.yaml | 65 +++++++++++++++++++ .../display/panel/samsung,s6e3ha2.txt | 31 --------- .../display/panel/samsung,s6e63j0x03.txt | 24 ------- 3 files changed, 65 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml new file mode 100644 index 000000000000..96bdde9298e0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMOLED MIPI-DSI panels + +maintainers: + - Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel + - samsung,s6e63j0x03 + # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + - samsung,s6e3ha2 + # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel + - samsung,s6e3hf2 + + reg: true + reset-gpios: true + enable-gpios: true + te-gpios: true + + vdd3-supply: + description: I/O voltage supply + + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt deleted file mode 100644 index 4acea25c244b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt +++ /dev/null @@ -1,31 +0,0 @@ -Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel -Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - -Required properties: - - compatible: should be one of: - "samsung,s6e3ha2", - "samsung,s6e3hf2". - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: I/O voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin (active low) - - enable-gpios: a GPIO spec for the panel enable pin (active high) - -Optional properties: - - te-gpios: a GPIO spec for the tearing effect synchronization signal - gpio pin (active high) - -Example: -&dsi { - ... - - panel@0 { - compatible = "samsung,s6e3ha2"; - reg = <0>; - vdd3-supply = <&ldo27_reg>; - vci-supply = <&ldo28_reg>; - reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; - enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt deleted file mode 100644 index 3f1a8392af7f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt +++ /dev/null @@ -1,24 +0,0 @@ -Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) - -Required properties: - - compatible: "samsung,s6e63j0x03" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: I/O voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin (active low) - - te-gpios: a GPIO spec for the tearing effect synchronization signal - gpio pin (active high) - -Example: -&dsi { - ... - - panel@0 { - compatible = "samsung,s6e63j0x03"; - reg = <0>; - vdd3-supply = <&ldo16_reg>; - vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; - te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - }; -}; -- 2.20.1
