v2:
- drop address in dsi node in example (Rob)
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Reviewed-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Vinay Simha BN <simhavcs@xxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
.../display/panel/jdi,lt070me05000.txt | 31 ---------
.../display/panel/jdi,lt070me05000.yaml | 69 +++++++++++++++++++
2 files changed, 69 insertions(+), 31 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
deleted file mode 100644
index 4989c91d505f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-JDI model LT070ME05000 1200x1920 7" DSI Panel
-
-Required properties:
-- compatible: should be "jdi,lt070me05000"
-- vddp-supply: phandle of the regulator that provides the supply voltage
- Power IC supply (3-5V)
-- iovcc-supply: phandle of the regulator that provides the supply voltage
- IOVCC , power supply for LCM (1.8V)
-- enable-gpios: phandle of gpio for enable line
- LED_EN, LED backlight enable, High active
-- reset-gpios: phandle of gpio for reset line
- This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
- XRES, Reset, Low active
-- dcdc-en-gpios: phandle of the gpio for power ic line
- Power IC supply enable, High active
-
-Example:
-
- dsi0: qcom,mdss_dsi@4700000 {
- panel@0 {
- compatible = "jdi,lt070me05000";
- reg = <0>;
-
- vddp-supply = <&pm8921_l17>;
- iovcc-supply = <&pm8921_lvs7>;
-
- enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
- dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
- };
- };
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 000000000000..b8b9435e464c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+ - Vinay Simha BN <simhavcs@xxxxxxxxx>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: jdi,lt070me05000
+
+ enable-gpios: true
+ reg: true
+ reset-gpios: true
+
+ vddp-supply:
+ description: |
+ The regulator that provides the supply voltage Power IC supply (3-5V)
+
+ iovcc-supply:
+ description: |
+ The regulator that provides the supply voltage IOVCC,
+ power supply for LCM (1.8V)
+
+ dcdc-en-gpios:
+ description: |
+ phandle of the gpio for power ic line
+ Power IC supply enable, High active
+
+required:
+ - compatible
+ - reg
+ - vddp-supply
+ - iovcc-supply
+ - enable-gpios
+ - reset-gpios
+ - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ vddp-supply = <&pm8921_l17>;
+ iovcc-supply = <&pm8921_lvs7>;
+
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+ dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
--
2.20.1
