Re: R: [PATCH v2 07/10] PCIe: qcom: fix init problem with missing PARF programming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ansuel,

On 4/8/20 3:38 PM, ansuelsmth@xxxxxxxxx wrote:
>> PARF programming
>>
>> Hi Ansuel,
>>
>> Please fix the patch subject for all patches in the series per Bjorn H.
>> request.
>>
>> PCI: qcom: Fix init problem with missing PARF programming
>>
>> Also the patch subject is misleading to me. Actually you change few phy
>> parameters: Tx De-Emphasis, Tx Swing and Rx equalization. On the other
>> side I guess those parameters are board specific and I'm not sure how
>> this change will reflect on apq8064 boards.
>>
> 
> I also think that this would brake apq8064, on ipq8064 this is needed or 
> the system doesn't boot. 
> Should I move this to the dts and set this params only if they are present
> in dts or also here check for compatible and set accordingly? 
> 

I also think that these phy params should be per board (and they are
tunable).

Maybe you can propose those as generic phy params in pci.txt binding
document and then we can ask DT maintainers for opinion. If they refuse
such generic bindings, we could switch to custom qcom,phy properties.

-- 
regards,
Stan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux