Hi Laurent,
Thank you for the review.
On Mon, Apr 6, 2020 at 6:34 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Apr 06, 2020 at 05:42:38PM +0100, Lad Prabhakar wrote:
> > Modes in the driver are based on xvclk frequency fixed to 24MHz, but where
> > as the OV5645 sensor can support the xvclk frequency ranging from 6MHz to
> > 24MHz. So instead making clock-frequency as dt-property just let the
> > driver enforce the required clock frequency.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/ov5645.c | 14 +++++---------
> > 1 file changed, 5 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index a6c17d15d754..52848fff8a08 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -61,6 +61,8 @@
> > #define OV5645_SDE_SAT_U 0x5583
> > #define OV5645_SDE_SAT_V 0x5584
> >
> > +#define OV5645_XVCLK_FREQ 24000000
> > +
> > /* regulator supplies */
> > static const char * const ov5645_supply_name[] = {
> > "vdddo", /* Digital I/O (1.8V) supply */
> > @@ -1094,25 +1096,19 @@ static int ov5645_probe(struct i2c_client *client)
> > return PTR_ERR(ov5645->xclk);
> > }
> >
> > - ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> > + ret = clk_set_rate(ov5645->xclk, OV5645_XVCLK_FREQ);
> > if (ret) {
> > - dev_err(dev, "could not get xclk frequency\n");
> > + dev_err(dev, "could not set xclk frequency\n");
> > return ret;
> > }
> > -
>
> I think you can keep the blank line here.
>
Oops my bad will drop that in next version.
Cheers,
--Prabhakar
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> > /* external clock must be 24MHz, allow 1% tolerance */
> > + xclk_freq = clk_get_rate(ov5645->xclk);
> > if (xclk_freq < 23760000 || xclk_freq > 24240000) {
> > dev_err(dev, "external clock frequency %u is not supported\n",
> > xclk_freq);
> > return -EINVAL;
> > }
> >
> > - ret = clk_set_rate(ov5645->xclk, xclk_freq);
> > - if (ret) {
> > - dev_err(dev, "could not set xclk frequency\n");
> > - return ret;
> > - }
> > -
> > for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
> > ov5645->supplies[i].supply = ov5645_supply_name[i];
> >
>
> --
> Regards,
>
> Laurent Pinchart
