On Mon, Apr 6, 2020 at 8:19 PM Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx> wrote: > > Add proximity sensor driver for Vishay vcnl3020. Only on-demand > measurement is supported for now. > Thank you! > Changes from v7: > 1. forgot to add Reviewed-by tag. > > Changes from v6: > 1. minor changes > 1.1 remove VCNL_DRV_NAME > 1.2 add braces in get_and_apply_property > > Changes from v5: > 1. add get_and_apply_property function for optional parameters. > 2. minor changes. > > Changes from v4: > 1. add vdd-supply,vddio-supply,interrupts properties into yaml. > 2. led-current -> vishay,led-current-milliamp in yaml. > 3. add possible values enum list. > 4. add bulk_read for result hi/lo registers. > 5. add description of vcnl3020_data structure. > 6. vcnl3020 id table is removed. > 7. make "vishay,led-current-milliamp" optional in yaml and code. > > Changes from v3: > 1. minor changes. > 2. add i2c block to fix dts section in yaml. > > Changes from v2: > 1. using regmap_read_poll_timeout instead of do-while in measurement > function. > 2. change struct i2client* in vcnl3020_data to struct dev* > 3. enable REGMAP_I2C in Kconfig > > Changes from v1: > 1. using regmap interface instead of i2c_smbus_* calls. > 2. switch from probe to probe_new. > 3. s32/int32_t -> int > > Ivan Mikhaylov (2): > iio: proximity: provide device tree binding document > iio: proximity: Add driver support for vcnl3020 proximity sensor > > .../bindings/iio/proximity/vcnl3020.yaml | 65 +++++ > drivers/iio/proximity/Kconfig | 11 + > drivers/iio/proximity/Makefile | 1 + > drivers/iio/proximity/vcnl3020.c | 234 ++++++++++++++++++ > 4 files changed, 311 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/proximity/vcnl3020.yaml > create mode 100644 drivers/iio/proximity/vcnl3020.c > > -- > 2.21.1 > -- With Best Regards, Andy Shevchenko
