Re: [v6, 1/5] media: dt-bindings: mt8183: Added camera ISP Pass 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jungo,

On 12/19/19 3:49 AM, Jungo Lin wrote:
> This patch adds DT binding document for the Pass 1 (P1) unit
> in Mediatek's camera ISP system. The Pass 1 unit grabs the sensor
> data out from the sensor interface, applies ISP image effects
> from tuning data and outputs the image data or statistics data to DRAM.
> 
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Jungo Lin <jungo.lin@xxxxxxxxxxxx>
> ---
> Changes from v6:
>  - Add port node description in the dt-binding document.
> ---
>  .../bindings/media/mediatek,camisp.txt        | 83 +++++++++++++++++++

It would be really nice to convert this to yaml.

For reference: https://lwn.net/Articles/771621/

Regards,
Helen

>  1 file changed, 83 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,camisp.txt b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> new file mode 100644
> index 000000000000..a85f37c0b87d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> @@ -0,0 +1,83 @@
> +* Mediatek Image Signal Processor Pass 1 (ISP P1)
> +
> +The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out
> +from the sensor interface, applies ISP effects from tuning data and outputs
> +the image data and statistics data to DRAM. Furthermore, Pass 1 unit has
> +the ability to output two different resolutions frames at the same time to
> +increase the performance of the camera application.
> +
> +Required properties:
> +- compatible: Must be "mediatek,mt8183-camisp" for MT8183.
> +- reg: Physical base address of the camera function block register and
> +  length of memory mapped region. Must contain an entry for each entry
> +  in reg-names.
> +- reg-names: Must include the following entries:
> +  "cam_sys": Camera base function block
> +  "cam_uni": Camera UNI function block
> +  "cam_a": Camera ISP P1 hardware unit A
> +  "cam_b": Camera ISP P1 hardware unit B
> +  "cam_c": Camera ISP P1 hardware unit C
> +- interrupts: Must contain an entry for each entry in interrupt-names.
> +- interrupt-names : Must include the following entries:
> +  "cam_uni": Camera UNI interrupt
> +  "cam_a": Camera unit A interrupt
> +  "cam_b": Camera unit B interrupt
> +  "cam_c": Camera unit C interrupt
> +- iommus: Shall point to the respective IOMMU block with master port
> +  as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> +  for details.
> +- clocks: A list of phandle and clock specifier pairs as listed
> +  in clock-names property, see
> +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: Must be "camsys_cam_cgpdn" and "camsys_camtg_cgpdn".
> +- mediatek,larb: Must contain the local arbiters in the current SoCs, see
> +  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +  for details.
> +- power-domains: a phandle to the power domain, see
> +  Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,scp: The node of system control processor (SCP), see
> +  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- port: child port node corresponding to the data input, in accordance with
> +  the video interface bindings defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> +  node must contain at least one endpoint.
> +
> +Example:
> +SoC specific DT entry:
> +
> +	camisp: camisp@1a000000 {
> +		compatible = "mediatek,mt8183-camisp";
> +		reg = <0 0x1a000000 0 0x1000>,
> +				<0 0x1a003000 0 0x1000>,
> +				<0 0x1a004000 0 0x2000>,
> +				<0 0x1a006000 0 0x2000>,
> +				<0 0x1a008000 0 0x2000>;
> +		reg-names = "cam_sys",
> +				"cam_uni",
> +				"cam_a",
> +				"cam_b",
> +				"cam_c";
> +		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
> +				<GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
> +				<GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>,
> +				<GIC_SPI 256 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "cam_uni",
> +				"cam_a",
> +				"cam_b",
> +				"cam_c";
> +		iommus = <&iommu M4U_PORT_CAM_IMGO>;
> +		clocks = <&camsys CLK_CAM_CAM>,
> +				<&camsys CLK_CAM_CAMTG>;
> +		clock-names = "camsys_cam_cgpdn",
> +				"camsys_camtg_cgpdn";
> +		mediatek,larb = <&larb3>,
> +				<&larb6>;
> +		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> +		mediatek,scp = <&scp>;
> +
> +		port {
> +			camisp_endpoint: endpoint {
> +				remote-endpoint = <&seninf_camisp_endpoint>;
> +			};
> +		};
> +	};
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux