This series resynchs the Keymile Kirkwood DTS files with mainline since the boards do not boot anymore with the 3.15 rc kernels (to be honest, I have not tested the last 2-3 releases). The changes are the addition of the PCIe controller for the 98dx4122 SoC, the explicit disabling of the SATA phys for this same SoC and finally the enabling of the PCIe controller on the Keymile Reference design. The series introduces kirkwood-km_common.dtsi that factors the common nodes between kirkwood-km_kirkwood.dts and the new board/design below. The series also adds a new DTS for another Keymile generic design where the mv64xxx eth interace is configured with fixed parameters to no phy but a switch (for board internal communication). The series applies and was tested on top of Jason's mvebu/dt branch (mvebu-dt-3.16 tag). Changes in v2: - introduce kirkwood-km_common.dtsi to allow factoring some nodes between boards - Take advantage of the kirkwood-km_common.dtsi file for kirkwood-km_fixedeth.dts Valentin Longchamp (3): ARM: dts: kirkwood: resynch 98dx4122 dtsi ARM: dts: kirkwood: add kirkwood-km_common DTSI files ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 43 ++++++++++++++++++++++++++ arch/arm/boot/dts/kirkwood-km_common.dtsi | 48 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/kirkwood-km_fixedeth.dts | 23 ++++++++++++++ arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 38 +---------------------- 4 files changed, 115 insertions(+), 37 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-km_common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-km_fixedeth.dts -- 1.8.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
