[PATCH 1/3] dt-bindings: ath10k: Add wifi-firmware subnode for wifi node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a wifi-firmware subnode for the wifi node.
This wifi-firmware subnode is needed for the
targets which do not support TrustZone.

Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/net/wireless/qcom,ath10k.txt       | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 71bf91f..65ee68e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -96,6 +96,17 @@ Optional properties:
 - qcom,coexist-gpio-pin : gpio pin number  information to support coex
 			  which will be used by wifi firmware.
 
+* Subnodes
+The ath10k wifi node can contain one optional firmware subnode.
+Firmware subnode is needed when the platform does not have TustZone.
+The firmware subnode must have:
+
+- iommus:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A list of phandle and IOMMU specifier pairs.
+
+
 Example (to supply PCI based wifi block details):
 
 In this example, the node is defined as child node of the PCI controller.
@@ -196,4 +207,7 @@ wifi@18000000 {
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
 		qcom,msa-fixed-perm;
+		wifi-firmware {
+			iommus = <&apps_iommu 0xc22 0x1>;
+		};
 };
-- 
2.7.4



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux