[PATCH 0/3] Add support to handle targets without TrustZone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The iommu mapping for S2 SIDs are taken care by TrustZone.
For the targets which does not have the support of TrustZone,
these mappings need to be created in the driver using an
iommu domain.

Leaving these SIDs unconfigured will result in a global
smmu fault. Hence configuring them for Non-TrustZone targets
is mandatory.

Rakesh Pillai (3):
  dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
  ath10k: Setup the msa resources before qmi init
  ath10k: Add support for targets without trustzone

 .../bindings/net/wireless/qcom,ath10k.txt          |  14 ++
 drivers/net/wireless/ath/ath10k/core.h             |   5 +
 drivers/net/wireless/ath/ath10k/qmi.c              |  55 +------
 drivers/net/wireless/ath/ath10k/qmi.h              |   3 -
 drivers/net/wireless/ath/ath10k/snoc.c             | 170 ++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/snoc.h             |   7 +
 6 files changed, 200 insertions(+), 54 deletions(-)

-- 
2.7.4



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux