On 22-03-2020 18:37, Jonathan Cameron wrote:
On Mon, 16 Mar 2020 07:52:18 +0100
Mike Looijmans <mike.looijmans@xxxxxxxx> wrote:
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
.../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++
Sorry. All new DT bindings need to be in yaml format.
Please put this in the same series as the driver.
sooy, I noticed this too late, patches are underway in separate mails
now. Hope that isn't a blocking issue?
Thanks,
Jonathan
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
new file mode 100644
index 000000000000..691a47726dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
@@ -0,0 +1,23 @@
+* Bosch BMI088 IMU combining accelerometer and gyroscope
+
+https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+Required properties:
+
+ - compatible : should be "bosch,bmi088_accel"
+ - reg : the I2C address of the sensor or the SPI chip select number
+
+Optional properties:
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
+ IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bmi088_accel@1 {
+ compatible = "bosch,bmi088_accel";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <90 IRQ_TYPE_EDGE_RISING>;
+};
--
Mike Looijmans
