This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, the accelerometer part. Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> --- .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt new file mode 100644 index 000000000000..691a47726dbc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt @@ -0,0 +1,23 @@ +* Bosch BMI088 IMU combining accelerometer and gyroscope + +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf + +Required properties: + + - compatible : should be "bosch,bmi088_accel" + - reg : the I2C address of the sensor or the SPI chip select number + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with + IRQ_TYPE_EDGE_RISING + +Example: + +bmi088_accel@1 { + compatible = "bosch,bmi088_accel"; + reg = <1>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio>; + interrupts = <90 IRQ_TYPE_EDGE_RISING>; +}; -- 2.17.1
