On Wed, Mar 11, 2020 at 12:18:50PM +0000, Ajay.Kathat@xxxxxxxxxxxxx wrote: > From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> > > This file describes the binding details to connect wilc1000 device. It's > moved from staging to 'Documentation/devicetree/bindings/net/wireless' > path. > > Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> > --- > .../net/wireless/microchip,wilc1000.yaml | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > > diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > new file mode 100644 > index 000000000000..bc6cc5d3f347 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > @@ -0,0 +1,72 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip WILC wireless devicetree bindings > + > +maintainers: > + - Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx> > + - Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> > + > +description: > + The wilc1000 chips can be connected via SPI or SDIO. This document > + describes the binding to connect wilc devices. > + > +properties: > + compatible: > + const: microchip,wilc1000 > + > + spi-max-frequency: true > + > + interrupts: > + maxItems: 1 > + > + clocks: > + description: phandle to the clock connected on rtc clock line. > + maxItems: 1 > + > + clock-names: > + const: rtc > + > +required: > + - compatible > + - interrupts > + > +examples: > + - | > + spi1: spi@fc018000 { spi { > + #address-cells = <1>; > + #size-cells = <0>; > + cs-gpios = <&pioB 21 0>; Drop this. Not relevant to the example. > + wifi@0 { > + compatible = "microchip,wilc1000"; > + spi-max-frequency = <48000000>; > + reg = <0>; > + interrupt-parent = <&pioC>; > + interrupts = <27 0>; > + clocks = <&pck1>; > + clock-names = "rtc"; > + }; > + }; > + > + - | > + mmc1: mmc@fc000000 { Drop the label. Either drop the unit address or add a 'reg' property to match. > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; > + non-removable; > + vmmc-supply = <&vcc_mmc1_reg>; > + vqmmc-supply = <&vcc_3v3_reg>; > + bus-width = <4>; > + wifi@0 { > + compatible = "microchip,wilc1000"; > + reg = <0>; > + interrupt-parent = <&pioC>; > + interrupts = <27 0>; > + clocks = <&pck1>; > + clock-names = "rtc"; > + }; > + }; > -- > 2.24.0
