On Mon, 16 Mar 2020 at 15:25, Michael Walle <michael@xxxxxxxx> wrote:
>
> Am 2020-03-16 14:00, schrieb Vladimir Oltean:
> > On Mon, 16 Mar 2020 at 14:49, Mark Brown <broonie@xxxxxxxxxx> wrote:
> >>
> >> On Mon, Mar 16, 2020 at 02:29:09PM +0200, Vladimir Oltean wrote:
> >>
> >> > Correct, the real problem is that I forgot to add a Fixes: tag for
> >> > patch 5. I'll do that now.
> >>
> >> OK. The series otherwise looked fine but I'll wait for testing.
> >> Michael, if there's issues remaining it might be good to get some
> >> Tested-bys for the patches prior to whatever's broken so we can get
> >> those fixes in (but obviously verifying that is work so only if you
> >> have time).
>
> I'm just about to test it. While my former "cat /dev/mtdN > /dev/null"
> is working. I had the impression that it was slower, so I tried to test
> it with dd now and a known chunk size.. only to find out that it is
> still not working:
>
> # dmesg|grep spi
> [ 1.894891] spi-nor spi1.0: w25q128fw (16384 Kbytes)
> ..
> # time cat /dev/mtd0 > /dev/null
> real 0m 30.73s
> user 0m 0.00s
> sys 0m 1.02s
> # dd if=/dev/mtd0 of=/dev/null bs=64
> 262144+0 records in
> 262144+0 records out
> # dd if=/dev/mtd0 of=/dev/null bs=64
> 262144+0 records in
> 262144+0 records out
> # dd if=/dev/mtd0 of=/dev/null bs=64
> dd: /dev/mtd0: Input/output error
I don't really have a SPI flash connected to DSPI on any LS1028A board.
Is this DMA or XSPI mode?
>
> I also wanted to test how it behaves if there are multiple processes
> access the /dev/mtdN device. I haven't found the time to dig into
> the call chain if see if there is any locking. Because what happens
> if transfer_one_message() is called twice at the same time from two
> different processes?
>
There is a mutex on the SPI bus, and therefore all variants of the
.transfer() call are operating under this lock protection, which
simplifies things quite a bit.
> >
> > This time I verified with a protocol analyzer all transfer lengths
> > from 1 all the way to 256, with this script:
> >
> > #!/bin/bash
> >
> > buf=''
> >
> > for i in $(seq 0 255); do
> > » buf="${buf}\x$(printf '%02x' ${i})"
> > » spidev_test --device /dev/spidev2.0 --bpw 8 --cpha --speed
> > 5000000 -p "${buf}"
> > done
> >
> > It looked fine as far as I could tell, and also the problems
> > surrounding Ctrl-C are no longer present. Nonetheless it would be good
> > if Michael could confirm, but I know that he's very busy too so it's
> > understandable if he can no longer spend time on this.
>
> I'm working on it ;)
>
> -michael
Thanks,
-Vladimir
