Hi. The first part is to document DT bindings for Keem Bay eMMC PHY. The second is the driver file, loosely based on phy-rockchip-emmc.c and phy-intel-emmc.c. The latter is not being reused as there are quite a number of differences i.e. registers offset, supported clock rates, bitfield to set. The patch was tested with Keem Bay evaluation module board. Thank you. Best regards, Zainie Wan Ahmad Zainie (2): dt-bindings: phy: intel: Add documentation for Keem Bay eMMC PHY phy: intel: Add Keem Bay eMMC PHY support .../bindings/phy/intel,keembay-emmc-phy.yaml | 57 +++++ drivers/phy/intel/Kconfig | 7 + drivers/phy/intel/Makefile | 1 + drivers/phy/intel/phy-keembay-emmc.c | 231 ++++++++++++++++++ 4 files changed, 296 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml create mode 100644 drivers/phy/intel/phy-keembay-emmc.c -- 2.17.1