sam,
Reviewed-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
Thanks.
On Sun, Mar 15, 2020 at 7:14 PM Sam Ravnborg <sam@xxxxxxxxxxxx> wrote:
>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Vinay Simha BN <simhavcs@xxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> .../display/panel/jdi,lt070me05000.txt | 31 ---------
> .../display/panel/jdi,lt070me05000.yaml | 69 +++++++++++++++++++
> 2 files changed, 69 insertions(+), 31 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> deleted file mode 100644
> index 4989c91d505f..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -JDI model LT070ME05000 1200x1920 7" DSI Panel
> -
> -Required properties:
> -- compatible: should be "jdi,lt070me05000"
> -- vddp-supply: phandle of the regulator that provides the supply voltage
> - Power IC supply (3-5V)
> -- iovcc-supply: phandle of the regulator that provides the supply voltage
> - IOVCC , power supply for LCM (1.8V)
> -- enable-gpios: phandle of gpio for enable line
> - LED_EN, LED backlight enable, High active
> -- reset-gpios: phandle of gpio for reset line
> - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
> - XRES, Reset, Low active
> -- dcdc-en-gpios: phandle of the gpio for power ic line
> - Power IC supply enable, High active
> -
> -Example:
> -
> - dsi0: qcom,mdss_dsi@4700000 {
> - panel@0 {
> - compatible = "jdi,lt070me05000";
> - reg = <0>;
> -
> - vddp-supply = <&pm8921_l17>;
> - iovcc-supply = <&pm8921_lvs7>;
> -
> - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> new file mode 100644
> index 000000000000..e0abf68ecb19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +maintainers:
> + - Vinay Simha BN <simhavcs@xxxxxxxxx>
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + const: jdi,lt070me05000
> +
> + enable-gpios: true
> + reg: true
> + reset-gpios: true
> +
> + vddp-supply:
> + description: |
> + The regulator that provides the supply voltage Power IC supply (3-5V)
> +
> + iovcc-supply:
> + description: |
> + The regulator that provides the supply voltage IOVCC,
> + power supply for LCM (1.8V)
> +
> + dcdc-en-gpios:
> + description: |
> + phandle of the gpio for power ic line
> + Power IC supply enable, High active
> +
> +required:
> + - compatible
> + - reg
> + - vddp-supply
> + - iovcc-supply
> + - enable-gpios
> + - reset-gpios
> + - dcdc-en-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + dsi: qcom,mdss_dsi@4700000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "jdi,lt070me05000";
> + reg = <0>;
> +
> + vddp-supply = <&pm8921_l17>;
> + iovcc-supply = <&pm8921_lvs7>;
> +
> + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> +...
> --
> 2.20.1
>
--
regards,
vinaysimha
