Hi Thierry,
On 15 May 2014 03:44, Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
> On Thu, May 15, 2014 at 12:47:21AM +0530, Rahul Sharma wrote:
> [...]
>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> [...]
>> +For "samsung,exynos4210-simple-phy" compatible PHYs the second cell in
>> +the PHY specifier identifies the PHY and the supported phys for exynos4210
>
> I think the specifier is only the part after the phandle, so this should
> probably be "... compatible PHYs the single cell specifier ..." or
> something equivalent.
>
ok. I will rephrase this line.
>> +are:
>> + HDMI_PHY,
>> + DAC_PHY,
>> + ADC_PHY,
>> + PCIE_PHY,
>> + SATA_PHY.
>
> I think you need to specify the literal values here as well, since the
> binding must be fully self-contained. That is you can't rely on the DT
> binding to be bundled with the exynos-simple-phy.h header.
>
Ok. I will add that.
>> @@ -20,3 +20,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
>> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
>> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
>> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
>> +obj-$(CONFIG_EXYNOS_SIMPLE_PHY) += exynos-simple-phy.o
>
> Perhaps this should be named phy-exynos-simple for consistency? Also it
> may be a good idea to sort this alphabetically to reduce the potential
> for conflicts.
yea correct. I will use "phy-exynos-simple".
I will place this addition in alphabetical order in makefile.
>
>> +static int exynos_phy_probe(struct platform_device *pdev)
>> +{
>> + const struct of_device_id *of_id = of_match_device(
>> + of_match_ptr(exynos_phy_of_match), &pdev->dev);
>
> Why does this need of_match_ptr()?
>
yea correct. Not required.
>> + dev_info(dev, "probe success\n");
>
> If at all this should be dev_dbg(). But in general the driver core will
> already complain if the driver fails to probe, so there's in general no
> need to mention when it probes successfully.
>
ok.
>> diff --git a/include/dt-bindings/phy/exynos-simple-phy.h b/include/dt-bindings/phy/exynos-simple-phy.h
> [...]
>> +/* simeple phys */
>
> s/simeple phys/simple PHYs/
>
> Although on second thought that comment probably shouldn't be there in
> the first place.
>
>> +#define INVALID (~1)
>
> This doesn't belong in this header. The value should never be used by a
> DT source file, should it?
I will move this to driver file.
>
>> +#define HDMI_PHY 0
>> +#define DAC_PHY 1
>> +#define ADC_PHY 2
>> +#define PCIE_PHY 3
>> +#define SATA_PHY 4
>
> Perhaps these should be namespaced somehow to avoid potential conflicts
> with other PHY providers?
How about XXX_SIMPLE_PHY?
>
>> +#define PHY_NR 5
>
> I'm not sure that this belongs here either. It's not a value that will
> ever appear in a DT source file.
I want it to grow along with new additions in the phy list else
catastrophic. This will look unrelated in driver.
Regards,
Rahul Sharma.
>
> Thierry
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
