This series adds new bindings and a device-tree file for the Smartlabs SML-5442TW set-top box. The original attempt [1] was 15-months ago but nothing has really changed apart from a change to yaml bindings. The QCA9377 BT device does not have bindings and early experiments to add them are partially successful but need further work. I have dropped the gpio-hog from the device-tree and will submit changes to add BT once the supporting bits exist elsewhere in the kernel. v7 - update gpio-led nodes - remove gpio-hog for BT enable - add bindings acks from Rob v6 - removed audio nodes again v5 - typo in card name v4 - typos/corrections from Andreas - convert to yaml bindings - add sound node back - confirmed gpio-hog is necessary v3 - change to Smartlabs LLC - removed sound node v2 - removed audio nodes - changes soundcard name to "meson-gx-audio" - added missing uart-has-rtscts; [1] https://patchwork.kernel.org/cover/10674939/ Christian Hewitt (3): dt-bindings: add vendor prefix for SmartLabs LLC dt-bindings: arm: amlogic: add support for the SmartLabs SML-5442TW arm64: dts: meson: add support for the SmartLabs SML-5442TW Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 284 +++++++++++++++++++++ 4 files changed, 288 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts -- 2.7.4
