From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed Processing System Gigabit Transceiver which provides PHY capabilities to USB, SATA, PCIE, Display Port and Ehernet SGMII controllers. Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- Changes since v5: - Document clocks and clock-names properties - Document resets and reset-names properties - Replace subnodes with an additional entry in the PHY cells - Drop lane frequency PHY cell, replaced by reference clock phandle - Convert bindings to YAML - Reword the subject line - Drop Rob's R-b as the bindings have significantly changed - Drop resets and reset-names properties --- .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 104 ++++++++++++++++++ include/dt-bindings/phy/phy.h | 1 + 2 files changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml new file mode 100644 index 000000000000..9948e4a60e45 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings + +maintainers: + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> + +description: | + This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The + GTR provides four lanes and is used by USB, SATA, PCIE, Display port and + Ethernet SGMII controllers. + +properties: + "#phy-cells": + const: 4 + description: | + The cells contain the following arguments. + + - description: The GTR lane + minimum: 0 + maximum: 3 + - description: The PHY type + enum: + - PHY_TYPE_DP + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + - PHY_TYPE_SGMII + - PHY_TYPE_USB + - description: The PHY instance + minimum: 0 + maximum: 1 # for DP, SATA or USB + maximum: 3 # for PCIE or SGMII + - description: The reference clock number + minimum: 0 + maximum: 3 + + compatible: + enum: + - xlnx,zynqmp-psgtr-v1.1 + - xlnx,zynqmp-psgtr + + clocks: + minItems: 1 + maxItems: 4 + description: | + Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected + inputs shall not have an entry. + + clock-names: + minItems: 1 + maxItems: 4 + items: + pattern: "^ref[0-3]$" + + reg: + items: + - description: SERDES registers block + - description: SIOU registers block + + reg-names: + items: + - const: serdes + - const: siou + +required: + - "#phy-cells" + - compatible + - reg + - reg-names + +if: + properties: + compatible: + const: xlnx,zynqmp-psgtr + +then: + properties: + xlnx,tx-termination-fix: + description: | + Include this for fixing functional issue with the TX termination + resistance in GT, which can be out of spec for the XCZU9EG silicon + version. + type: boolean + +additionalProperties: false + +examples: + - | + phy: phy@fd400000 { + compatible = "xlnx,zynqmp-psgtr-v1.1"; + reg = <0x0 0xfd400000 0x0 0x40000>, + <0x0 0xfd3d0000 0x0 0x1000>; + reg-names = "serdes", "siou"; + clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>; + clock-names = "ref1", "ref2", "ref3"; + #phy-cells = <4>; + status = "okay"; + }; + +... diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h index 1f3f866fae7b..f6bc83b66ae9 100644 --- a/include/dt-bindings/phy/phy.h +++ b/include/dt-bindings/phy/phy.h @@ -17,5 +17,6 @@ #define PHY_TYPE_USB3 4 #define PHY_TYPE_UFS 5 #define PHY_TYPE_DP 6 +#define PHY_TYPE_SGMII 7 #endif /* _DT_BINDINGS_PHY */ -- Regards, Laurent Pinchart
