From: Chen-Yu Tsai <wens@xxxxxxxx>
When the AHCI device node was added, it was added in the wrong location
in the device tree file. The device nodes should be sorted by register
address.
Move the device node to before EHCI1, where it belongs.
Fixes: 41c64d3318aa ("ARM: dts: sun8i: r40: add sata node")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index d5442b5b6fd2..b278686d0c22 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -307,6 +307,17 @@ crypto: crypto@1c15000 {
resets = <&ccu RST_BUS_CE>;
};
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ reset-names = "ahci";
+ status = "disabled";
+
+ };
+
ehci1: usb@1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
@@ -733,17 +744,6 @@ spi3: spi@1c0f000 {
#size-cells = <0>;
};
- ahci: sata@1c18000 {
- compatible = "allwinner,sun8i-r40-ahci";
- reg = <0x01c18000 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
- resets = <&ccu RST_BUS_SATA>;
- reset-names = "ahci";
- status = "disabled";
-
- };
-
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
--
2.25.1
