Hi Rob,
On 2020-03-09 21:38, Rob Herring wrote:
On Sat, 7 Mar 2020 22:14:11 +0100, Artur Rojek wrote:
Add documentation for the adc-joystick driver, used to provide support
for joysticks connected over ADC.
Signed-off-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
Tested-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
Changes:
v2: - Add `reg` property to axis subnode in order to enumerate the
axes,
- rename `linux,abs-code` property to `linux,code`,
- drop `linux,` prefix from the remaining properties of axis
subnode
v3: no change
v4: - remove "bindings" from the unique identifier string,
- replace `|` with `>` for all description properties,
- specify the number of items for `io-channels`,
- correct the regex pattern of `axis` property,
- specify the value range of `reg` property for each axis,
- put `abs-range` properties under `allOf`
.../bindings/input/adc-joystick.yaml | 121
++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644
Documentation/devicetree/bindings/input/adc-joystick.yaml
My bot found errors running 'make dt_binding_check' on your patch:
Like with the previous versions of this patch set, the DTS example
requires that
patch [2/5] is applied first. When that is done, the DT check does
succeed here.
Regards,
Artur
Error:
Documentation/devicetree/bindings/input/adc-joystick.example.dts:22.31-32
syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:311: recipe for target
'Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml'
failed
make[1]: ***
[Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml]
Error 1
Makefile:1262: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1250951
Please check and re-submit.
