On Thu 05 Mar 06:53 PST 2020, Srinivas Kandagatla wrote:
> This patch adds support UART0, I2C0, I2C1 and SPI0 available
> on Low Speed expansion connector.
>
Applied, after fixing the sort order. Thanks for posting this!
Regards,
Bjorn
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 34 ++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 350d3ea60235..fd2bdf10a4d9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -434,6 +434,24 @@
> vdda-pll-supply = <&vreg_l26a_1p2>;
> };
>
> +&i2c11 {
> + /* On Low speed expansion */
> + label = "LS-I2C1";
> + status = "okay";
> +};
> +
> +&i2c14 {
> + /* On Low speed expansion */
> + label = "LS-I2C0";
> + status = "okay";
> +};
> +
> +&spi2 {
> + /* On Low speed expansion */
> + label = "LS-SPI0";
> + status = "okay";
> +};
> +
> &pm8998_gpio {
> vol_up_pin_a: vol-up-active {
> pins = "gpio6";
> @@ -574,6 +592,11 @@
> };
> };
>
> +&uart3 {
> + label = "LS-UART0";
> + status = "disabled";
> +};
> +
> &uart6 {
> status = "okay";
>
> @@ -589,6 +612,7 @@
> };
>
> &uart9 {
> + label = "LS-UART1";
> status = "okay";
> };
>
> @@ -674,6 +698,16 @@
> };
>
> /* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +&qup_spi2_default {
> + drive-strength = <16>;
> +};
> +
> +&qup_uart3_default{
> + pinmux {
> + pins = "gpio41", "gpio42", "gpio43", "gpio44";
> + function = "qup3";
> + };
> +};
>
> &qup_uart6_default {
> pinmux {
> --
> 2.21.0
>
