[PATCH v3] dt-bindings: rcar-vin: Convert bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Convert Renesas R-Car VIN bindings documentation to json-schema.

As the examples in the bindings now can be tested add a new one which
describes how the both a parallel and a CSI-2 source can be connected on
Gen3 SoCs.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
 .../devicetree/bindings/media/renesas,vin.txt | 217 ----------
 .../bindings/media/renesas,vin.yaml           | 402 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 403 insertions(+), 218 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/renesas,vin.txt
 create mode 100644 Documentation/devicetree/bindings/media/renesas,vin.yaml

diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
deleted file mode 100644
index 5eefd62ac5c5b9fd..0000000000000000
--- a/Documentation/devicetree/bindings/media/renesas,vin.txt
+++ /dev/null
@@ -1,217 +0,0 @@
-Renesas R-Car Video Input driver (rcar_vin)
--------------------------------------------
-
-The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices.
-
-Each VIN instance has a single parallel input that supports RGB and YUV video,
-with both external synchronization and BT.656 synchronization for the latter.
-Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
-
- - compatible: Must be one or more of the following
-   - "renesas,vin-r8a7743" for the R8A7743 device
-   - "renesas,vin-r8a7744" for the R8A7744 device
-   - "renesas,vin-r8a7745" for the R8A7745 device
-   - "renesas,vin-r8a77470" for the R8A77470 device
-   - "renesas,vin-r8a774a1" for the R8A774A1 device
-   - "renesas,vin-r8a774b1" for the R8A774B1 device
-   - "renesas,vin-r8a774c0" for the R8A774C0 device
-   - "renesas,vin-r8a7778" for the R8A7778 device
-   - "renesas,vin-r8a7779" for the R8A7779 device
-   - "renesas,vin-r8a7790" for the R8A7790 device
-   - "renesas,vin-r8a7791" for the R8A7791 device
-   - "renesas,vin-r8a7792" for the R8A7792 device
-   - "renesas,vin-r8a7793" for the R8A7793 device
-   - "renesas,vin-r8a7794" for the R8A7794 device
-   - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,vin-r8a7796" for the R8A7796 device
-   - "renesas,vin-r8a77965" for the R8A77965 device
-   - "renesas,vin-r8a77970" for the R8A77970 device
-   - "renesas,vin-r8a77980" for the R8A77980 device
-   - "renesas,vin-r8a77990" for the R8A77990 device
-   - "renesas,vin-r8a77995" for the R8A77995 device
-   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
-     device.
-
-   When compatible with the generic version nodes must list the
-   SoC-specific version corresponding to the platform first
-   followed by the generic version.
-
- - reg: the register base and size for the device registers
- - interrupts: the interrupt for the device
- - clocks: Reference to the parent clock
-
-The per-board settings for Gen2 and RZ/G1 platforms:
-
-- port - sub-node describing a single endpoint connected to the VIN
-  from external SoC pins as described in video-interfaces.txt[1].
-  Only the first one will be considered as each vin interface has one
-  input port.
-
-  - Optional properties for endpoint nodes:
-    - hsync-active: see [1] for description. Default is active high.
-    - vsync-active: see [1] for description. Default is active high.
-      If both HSYNC and VSYNC polarities are not specified, embedded
-      synchronization is selected.
-    - field-active-even: see [1] for description. Default is active high.
-    - bus-width: see [1] for description. The selected bus width depends on
-      the SoC type and selected input image format.
-      Valid values are: 8, 10, 12, 16, 24 and 32.
-    - data-shift: see [1] for description. Valid values are 0 and 8.
-    - data-enable-active: polarity of CLKENB signal, see [1] for
-      description. Default is active high.
-
-The per-board settings for Gen3 and RZ/G2 platforms:
-
-Gen3 and RZ/G2 platforms can support both a single connected parallel input
-source from external SoC pins (port@0) and/or multiple parallel input sources
-from local SoC CSI-2 receivers (port@1) depending on SoC.
-
-- renesas,id - ID number of the VIN, VINx in the documentation.
-- ports
-    - port@0 - sub-node describing a single endpoint connected to the VIN
-      from external SoC pins as described in video-interfaces.txt[1].
-      Describing more than one endpoint in port@0 is invalid. Only VIN
-      instances that are connected to external pins should have port@0.
-
-      Endpoint nodes of port@0 support the optional properties listed in
-      the Gen2 per-board settings description.
-
-    - port@1 - sub-nodes describing one or more endpoints connected to
-      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
-      use the following schema.
-
-        - endpoint@0 - sub-node describing the endpoint connected to CSI20
-        - endpoint@1 - sub-node describing the endpoint connected to CSI21
-        - endpoint@2 - sub-node describing the endpoint connected to CSI40
-        - endpoint@3 - sub-node describing the endpoint connected to CSI41
-
-      Endpoint nodes of port@1 do not support any optional endpoint property.
-
-Device node example for Gen2 platforms
---------------------------------------
-
-        aliases {
-                vin0 = &vin0;
-        };
-
-        vin0: vin@e6ef0000 {
-                compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
-                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
-                status = "disabled";
-        };
-
-Board setup example for Gen2 platforms (vin1 composite video input)
--------------------------------------------------------------------
-
-&i2c2   {
-        status = "okay";
-        pinctrl-0 = <&i2c2_pins>;
-        pinctrl-names = "default";
-
-        adv7180@20 {
-                compatible = "adi,adv7180";
-                reg = <0x20>;
-                remote = <&vin1>;
-
-                port {
-                        adv7180: endpoint {
-                                bus-width = <8>;
-                                remote-endpoint = <&vin1ep0>;
-                        };
-                };
-        };
-};
-
-/* composite video input */
-&vin1 {
-        pinctrl-0 = <&vin1_pins>;
-        pinctrl-names = "default";
-
-        status = "okay";
-
-        port {
-                vin1ep0: endpoint {
-                        remote-endpoint = <&adv7180>;
-                        bus-width = <8>;
-                };
-        };
-};
-
-Device node example for Gen3 platforms
---------------------------------------
-
-        vin0: video@e6ef0000 {
-                compatible = "renesas,vin-r8a7795";
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 811>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 811>;
-                renesas,id = <0>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                vin0csi20: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint= <&csi20vin0>;
-                                };
-                                vin0csi21: endpoint@1 {
-                                        reg = <1>;
-                                        remote-endpoint= <&csi21vin0>;
-                                };
-                                vin0csi40: endpoint@2 {
-                                        reg = <2>;
-                                        remote-endpoint= <&csi40vin0>;
-                                };
-                        };
-                };
-        };
-
-        csi20: csi2@fea80000 {
-                compatible = "renesas,r8a7795-csi2";
-                reg = <0 0xfea80000 0 0x10000>;
-                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 714>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 714>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@0 {
-                                reg = <0>;
-                                csi20_in: endpoint {
-                                        clock-lanes = <0>;
-                                        data-lanes = <1>;
-                                        remote-endpoint = <&adv7482_txb>;
-                                };
-                        };
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                csi20vin0: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint = <&vin0csi20>;
-                                };
-                        };
-                };
-        };
-
-[1] video-interfaces.txt common video media interface
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
new file mode 100644
index 0000000000000000..1ec947b4781f966b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -0,0 +1,402 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Video Input (VIN)
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
+
+description:
+  The R-Car Video Input (VIN) device provides video input capabilities for the
+  Renesas R-Car family of devices.
+
+  Each VIN instance has a single parallel input that supports RGB and YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+  Depending on the instance the VIN input is connected to external SoC pins, or
+  on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,vin-r8a7743  # RZ/G1M
+              - renesas,vin-r8a7744  # RZ/G1N
+              - renesas,vin-r8a7745  # RZ/G1E
+              - renesas,vin-r8a77470 # RZ/G1C
+              - renesas,vin-r8a7790  # R-Car H2
+              - renesas,vin-r8a7791  # R-Car M2-W
+              - renesas,vin-r8a7792  # R-Car V2H
+              - renesas,vin-r8a7793  # R-Car M2-N
+              - renesas,vin-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,vin-r8a774a1 # RZ/G2M
+              - renesas,vin-r8a774b1 # RZ/G2N
+              - renesas,vin-r8a774c0 # RZ/G2E
+              - renesas,vin-r8a7778  # R-Car M1
+              - renesas,vin-r8a7779  # R-Car H1
+              - renesas,vin-r8a7795  # R-Car H3
+              - renesas,vin-r8a7796  # R-Car M3-W
+              - renesas,vin-r8a77965 # R-Car M3-N
+              - renesas,vin-r8a77970 # R-Car V3M
+              - renesas,vin-r8a77980 # R-Car V3H
+              - renesas,vin-r8a77990 # R-Car E3
+              - renesas,vin-r8a77995 # R-Car D3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  #The per-board settings for Gen2 and RZ/G1 platforms:
+  port:
+    type: object
+    description:
+      A node containing a parallel input with a single endpoint definitions as
+      documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          hsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          vsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          field-active-even: true
+
+          bus-width: true
+
+          data-shift: true
+
+          data-enable-active:
+            description: Polarity of CLKENB signal
+            default: 1
+
+          pclk-sample: true
+
+          data-active: true
+
+          remote-endpoint: true
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+  #The per-board settings for Gen3 and RZ/G2 platforms:
+  renesas,id:
+    description: VIN channel number
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 15
+
+  ports:
+    type: object
+    description:
+      A node containing input nodes with endpoint definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            type: object
+
+            properties:
+              hsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              vsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              field-active-even: true
+
+              bus-width: true
+
+              data-shift: true
+
+              data-enable-active:
+                description: Polarity of CLKENB signal
+                default: 1
+
+              pclk-sample: true
+
+              data-active: true
+
+              remote-endpoint: true
+
+            required:
+              - remote-endpoint
+
+            additionalProperties: false
+
+        required:
+          - endpoint
+
+        additionalProperties: false
+
+      port@1:
+        type: object
+        description:
+          Input port node, multiple endpoints describing all the R-Car CSI-2
+          modules connected the VIN.
+
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          reg:
+            const: 1
+
+          endpoint@0:
+            type: object
+            description: Endpoint connected to CSI20.
+
+            properties:
+              reg:
+                const: 0
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@1:
+            type: object
+            description: Endpoint connected to CSI21.
+
+            properties:
+              reg:
+                const: 1
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@2:
+            type: object
+            description: Endpoint connected to CSI40.
+
+            properties:
+              reg:
+                const: 2
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+          endpoint@3:
+            type: object
+            description: Endpoint connected to CSI41.
+
+            properties:
+              reg:
+                const: 3
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+        anyOf:
+          - required:
+            - endpoint@0
+          - required:
+            - endpoint@1
+          - required:
+            - endpoint@2
+          - required:
+            - endpoint@3
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,vin-r8a7778
+          - renesas,vin-r8a7779
+          - renesas,rcar-gen2-vin
+then:
+  required:
+    - port
+else:
+  required:
+    - renesas,id
+    - ports
+
+additionalProperties: false
+
+examples:
+  # Device node example for Gen2 platform
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vin1: vin@e6ef1000 {
+            compatible = "renesas,vin-r8a7790",
+                         "renesas,rcar-gen2-vin";
+            reg = <0 0xe6ef1000 0 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 810>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 810>;
+
+            port {
+                    vin1ep0: endpoint {
+                            remote-endpoint = <&adv7180>;
+                            bus-width = <8>;
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with only CSI-2
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vin0: video@e6ef0000 {
+            compatible = "renesas,vin-r8a7795";
+            reg = <0 0xe6ef0000 0 0x1000>;
+            interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 811>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 811>;
+            renesas,id = <0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin0csi20: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint= <&csi20vin0>;
+                            };
+                            vin0csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint= <&csi40vin0>;
+                            };
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with CSI-2 and parallel
+  - |
+    #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77970-sysc.h>
+
+    vin2: video@e6ef2000 {
+            compatible = "renesas,vin-r8a77970";
+            reg = <0 0xe6ef2000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 809>;
+            power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+            resets = <&cpg 809>;
+            renesas,id = <2>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            vin2_in: endpoint {
+                                    remote-endpoint = <&adv7612_out>;
+                                    hsync-active = <0>;
+                                    vsync-active = <0>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin2csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&csi40vin2>;
+                            };
+                    };
+            };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 6158a143a13e075c..78f1ee2f091f8ff4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10435,7 +10435,7 @@ L:	linux-renesas-soc@xxxxxxxxxxxxxxx
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
-F:	Documentation/devicetree/bindings/media/renesas,vin.txt
+F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
 F:	drivers/media/platform/rcar-vin/
 
 MEDIA DRIVERS FOR RENESAS - VSP1
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux