On Thu, Feb 27, 2020 at 09:46:40PM +1300, Chris Packham wrote: > Add binding information for the adi,pwm-active-state property. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Applied. Thanks, Guenter > --- > > Notes: > Changes in v5: > - change to adi,pwm-active-state > - uint32 array > > Changes in v4: > - use $ref uint32 and enum > - add adi vendor prefix > > Cahnges in v3: > - new > > .../devicetree/bindings/hwmon/adt7475.yaml | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > index e40612ee075f..76985034ea73 100644 > --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > @@ -50,6 +50,19 @@ patternProperties: > - $ref: /schemas/types.yaml#/definitions/uint32 > - enum: [0, 1] > > + "^adi,pwm-active-state$": > + description: | > + Integer array, represents the active state of the pwm outputs If set to 0 > + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm > + uses a logic high output for 100% duty cycle. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + - minItems: 3 > + maxItems: 3 > + items: > + enum: [0, 1] > + default: 1 > + > required: > - compatible > - reg > @@ -65,6 +78,7 @@ examples: > reg = <0x2e>; > adi,bypass-attenuator-in0 = <1>; > adi,bypass-attenuator-in1 = <0>; > + adi,pwm-active-state = <1 0 1>; > }; > }; >
