Hi Nikolaus,
Le sam., févr. 29, 2020 at 19:58, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
Hi Paul,
Am 29.02.2020 um 17:09 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
Hi Nikolaus,
Le ven., févr. 28, 2020 at 19:02, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
There is a ACT8600 on the CI20 board and the bindings of the
ACT8865 driver have changed without updating the CI20 device
tree. Therefore the PMU can not be probed successfully and
is running in power-on reset state.
Fix DT to match the latest act8865-regulator bindings.
Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
arch/mips/boot/dts/ingenic/ci20.dts | 48
++++++++++++++++++++---------
1 file changed, 33 insertions(+), 15 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
b/arch/mips/boot/dts/ingenic/ci20.dts
index 59c104289ece..44741e927d2b 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,8 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
This include should be in patch 3/5 where it's first used.
Yes. That is much better.
With that fixed:
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
for the whole series.
What is easier: that you fix it during applying somewhere
or should I send a v5?
I guess send a V5.
- Paul
BR,
Nikolaus
