The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.
Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
following warnings in 'make dtbs_check'. Fix them.
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,sdm845-tsens
+ - qcom,sc7180-tsens
- const: qcom,tsens-v2
reg:
--
2.20.1
