Cadence SALVO PHY is a 28nm product, and is only used for USB3 & USB2.
According to the Cadence, this PHY is a legacy Module, and Sierra and
Torrent are later evolutions from it, and their sequence overlap is
minimal, meaning we cannot reuse either (Sierra & Torrent) of the PHY
drivers.
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
drivers/phy/cadence/Kconfig | 9 +
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/phy-cadence-salvo.c | 316 ++++++++++++++++++++++++
3 files changed, 326 insertions(+)
create mode 100644 drivers/phy/cadence/phy-cadence-salvo.c
diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig
index b2db916db64b..eca272b227b7 100644
--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
@@ -27,3 +27,12 @@ config PHY_CADENCE_SIERRA
select GENERIC_PHY
help
Enable this to support the Cadence Sierra PHY driver
+
+config PHY_CADENCE_SALVO
+ tristate "Cadence Salvo PHY Driver"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Cadence SALVO PHY driver,
+ this PHY is a legacy PHY, and only are used for USB3
+ and USB2.
diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile
index 8f89560f1711..7c7d13c0c647 100644
--- a/drivers/phy/cadence/Makefile
+++ b/drivers/phy/cadence/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_PHY_CADENCE_DP) += phy-cadence-dp.o
obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o
obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
+obj-$(CONFIG_PHY_CADENCE_SALVO) += phy-cadence-salvo.o
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
new file mode 100644
index 000000000000..fa666527356d
--- /dev/null
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Salvo PHY is a 28nm PHY, it is a legacy PHY, and only
+ * for USB3 and USB2.
+ *
+ * Copyright (c) 2019-2020 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+/* PHY register definition */
+#define PHY_PMA_CMN_CTRL1 0xC800
+#define TB_ADDR_CMN_DIAG_HSCLK_SEL 0x01e0
+#define TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR 0x0084
+#define TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR 0x0085
+#define TB_ADDR_CMN_PLL0_INTDIV 0x0094
+#define TB_ADDR_CMN_PLL0_FRACDIV 0x0095
+#define TB_ADDR_CMN_PLL0_HIGH_THR 0x0096
+#define TB_ADDR_CMN_PLL0_SS_CTRL1 0x0098
+#define TB_ADDR_CMN_PLL0_SS_CTRL2 0x0099
+#define TB_ADDR_CMN_PLL0_DSM_DIAG 0x0097
+#define TB_ADDR_CMN_DIAG_PLL0_OVRD 0x01c2
+#define TB_ADDR_CMN_DIAG_PLL0_FBH_OVRD 0x01c0
+#define TB_ADDR_CMN_DIAG_PLL0_FBL_OVRD 0x01c1
+#define TB_ADDR_CMN_DIAG_PLL0_V2I_TUNE 0x01C5
+#define TB_ADDR_CMN_DIAG_PLL0_CP_TUNE 0x01C6
+#define TB_ADDR_CMN_DIAG_PLL0_LF_PROG 0x01C7
+#define TB_ADDR_CMN_DIAG_PLL0_TEST_MODE 0x01c4
+#define TB_ADDR_CMN_PSM_CLK_CTRL 0x0061
+#define TB_ADDR_XCVR_DIAG_RX_LANE_CAL_RST_TMR 0x40ea
+#define TB_ADDR_XCVR_PSM_RCTRL 0x4001
+#define TB_ADDR_TX_PSC_A0 0x4100
+#define TB_ADDR_TX_PSC_A1 0x4101
+#define TB_ADDR_TX_PSC_A2 0x4102
+#define TB_ADDR_TX_PSC_A3 0x4103
+#define TB_ADDR_TX_DIAG_ECTRL_OVRD 0x41f5
+#define TB_ADDR_TX_PSC_CAL 0x4106
+#define TB_ADDR_TX_PSC_RDY 0x4107
+#define TB_ADDR_RX_PSC_A0 0x8000
+#define TB_ADDR_RX_PSC_A1 0x8001
+#define TB_ADDR_RX_PSC_A2 0x8002
+#define TB_ADDR_RX_PSC_A3 0x8003
+#define TB_ADDR_RX_PSC_CAL 0x8006
+#define TB_ADDR_RX_PSC_RDY 0x8007
+#define TB_ADDR_TX_TXCC_MGNLS_MULT_000 0x4058
+#define TB_ADDR_TX_DIAG_BGREF_PREDRV_DELAY 0x41e7
+#define TB_ADDR_RX_SLC_CU_ITER_TMR 0x80e3
+#define TB_ADDR_RX_SIGDET_HL_FILT_TMR 0x8090
+#define TB_ADDR_RX_SAMP_DAC_CTRL 0x8058
+#define TB_ADDR_RX_DIAG_SIGDET_TUNE 0x81dc
+#define TB_ADDR_RX_DIAG_LFPSDET_TUNE2 0x81df
+#define TB_ADDR_RX_DIAG_BS_TM 0x81f5
+#define TB_ADDR_RX_DIAG_DFE_CTRL1 0x81d3
+#define TB_ADDR_RX_DIAG_ILL_IQE_TRIM4 0x81c7
+#define TB_ADDR_RX_DIAG_ILL_E_TRIM0 0x81c2
+#define TB_ADDR_RX_DIAG_ILL_IQ_TRIM0 0x81c1
+#define TB_ADDR_RX_DIAG_ILL_IQE_TRIM6 0x81c9
+#define TB_ADDR_RX_DIAG_RXFE_TM3 0x81f8
+#define TB_ADDR_RX_DIAG_RXFE_TM4 0x81f9
+#define TB_ADDR_RX_DIAG_LFPSDET_TUNE 0x81dd
+#define TB_ADDR_RX_DIAG_DFE_CTRL3 0x81d5
+#define TB_ADDR_RX_DIAG_SC2C_DELAY 0x81e1
+#define TB_ADDR_RX_REE_VGA_GAIN_NODFE 0x81bf
+#define TB_ADDR_XCVR_PSM_CAL_TMR 0x4002
+#define TB_ADDR_XCVR_PSM_A0BYP_TMR 0x4004
+#define TB_ADDR_XCVR_PSM_A0IN_TMR 0x4003
+#define TB_ADDR_XCVR_PSM_A1IN_TMR 0x4005
+#define TB_ADDR_XCVR_PSM_A2IN_TMR 0x4006
+#define TB_ADDR_XCVR_PSM_A3IN_TMR 0x4007
+#define TB_ADDR_XCVR_PSM_A4IN_TMR 0x4008
+#define TB_ADDR_XCVR_PSM_A5IN_TMR 0x4009
+#define TB_ADDR_XCVR_PSM_A0OUT_TMR 0x400a
+#define TB_ADDR_XCVR_PSM_A1OUT_TMR 0x400b
+#define TB_ADDR_XCVR_PSM_A2OUT_TMR 0x400c
+#define TB_ADDR_XCVR_PSM_A3OUT_TMR 0x400d
+#define TB_ADDR_XCVR_PSM_A4OUT_TMR 0x400e
+#define TB_ADDR_XCVR_PSM_A5OUT_TMR 0x400f
+#define TB_ADDR_TX_RCVDET_EN_TMR 0x4122
+#define TB_ADDR_TX_RCVDET_ST_TMR 0x4123
+#define TB_ADDR_XCVR_DIAG_LANE_FCM_EN_MGN_TMR 0x40f2
+#define TB_ADDR_TX_RCVDETSC_CTRL 0x4124
+
+/* TB_ADDR_TX_RCVDETSC_CTRL */
+#define RXDET_IN_P3_32KHZ BIT(1)
+
+struct cdns_reg_pairs {
+ u16 val;
+ u32 off;
+};
+
+struct cdns_salvo_data {
+ u8 reg_offset_shift;
+ struct cdns_reg_pairs *init_sequence_val;
+ u8 init_sequence_length;
+};
+
+struct cdns_salvo_phy {
+ struct phy *phy;
+ struct clk *clk;
+ void __iomem *base;
+ struct cdns_salvo_data *data;
+};
+
+static const struct of_device_id cdns_salvo_phy_of_match[];
+static u16 cdns_salvo_read(struct cdns_salvo_phy *salvo_phy, u32 reg)
+{
+ return (u16)readl(salvo_phy->base +
+ reg * (1 << salvo_phy->data->reg_offset_shift));
+}
+
+static void cdns_salvo_write(struct cdns_salvo_phy *salvo_phy,
+ u32 reg, u16 val)
+{
+ writel(val, salvo_phy->base +
+ reg * (1 << salvo_phy->data->reg_offset_shift));
+}
+
+/*
+ * Below bringup sequence pair are from Cadence PHY's User Guide
+ * and NXP platform tuning results.
+ */
+static struct cdns_reg_pairs cdns_nxp_sequence_pair[] = {
+ {0x0830, PHY_PMA_CMN_CTRL1},
+ {0x0010, TB_ADDR_CMN_DIAG_HSCLK_SEL},
+ {0x00f0, TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR},
+ {0x0018, TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR},
+ {0x00d0, TB_ADDR_CMN_PLL0_INTDIV},
+ {0x4aaa, TB_ADDR_CMN_PLL0_FRACDIV},
+ {0x0034, TB_ADDR_CMN_PLL0_HIGH_THR},
+ {0x01ee, TB_ADDR_CMN_PLL0_SS_CTRL1},
+ {0x7f03, TB_ADDR_CMN_PLL0_SS_CTRL2},
+ {0x0020, TB_ADDR_CMN_PLL0_DSM_DIAG},
+ {0x0000, TB_ADDR_CMN_DIAG_PLL0_OVRD},
+ {0x0000, TB_ADDR_CMN_DIAG_PLL0_FBH_OVRD},
+ {0x0000, TB_ADDR_CMN_DIAG_PLL0_FBL_OVRD},
+ {0x0007, TB_ADDR_CMN_DIAG_PLL0_V2I_TUNE},
+ {0x0027, TB_ADDR_CMN_DIAG_PLL0_CP_TUNE},
+ {0x0008, TB_ADDR_CMN_DIAG_PLL0_LF_PROG},
+ {0x0022, TB_ADDR_CMN_DIAG_PLL0_TEST_MODE},
+ {0x000a, TB_ADDR_CMN_PSM_CLK_CTRL},
+ {0x0139, TB_ADDR_XCVR_DIAG_RX_LANE_CAL_RST_TMR},
+ {0xbefc, TB_ADDR_XCVR_PSM_RCTRL},
+
+ {0x7799, TB_ADDR_TX_PSC_A0},
+ {0x7798, TB_ADDR_TX_PSC_A1},
+ {0x509b, TB_ADDR_TX_PSC_A2},
+ {0x0003, TB_ADDR_TX_DIAG_ECTRL_OVRD},
+ {0x509b, TB_ADDR_TX_PSC_A3},
+ {0x2090, TB_ADDR_TX_PSC_CAL},
+ {0x2090, TB_ADDR_TX_PSC_RDY},
+
+ {0xA6FD, TB_ADDR_RX_PSC_A0},
+ {0xA6FD, TB_ADDR_RX_PSC_A1},
+ {0xA410, TB_ADDR_RX_PSC_A2},
+ {0x2410, TB_ADDR_RX_PSC_A3},
+
+ {0x23FF, TB_ADDR_RX_PSC_CAL},
+ {0x2010, TB_ADDR_RX_PSC_RDY},
+
+ {0x0020, TB_ADDR_TX_TXCC_MGNLS_MULT_000},
+ {0x00ff, TB_ADDR_TX_DIAG_BGREF_PREDRV_DELAY},
+ {0x0002, TB_ADDR_RX_SLC_CU_ITER_TMR},
+ {0x0013, TB_ADDR_RX_SIGDET_HL_FILT_TMR},
+ {0x0000, TB_ADDR_RX_SAMP_DAC_CTRL},
+ {0x1004, TB_ADDR_RX_DIAG_SIGDET_TUNE},
+ {0x4041, TB_ADDR_RX_DIAG_LFPSDET_TUNE2},
+ {0x0480, TB_ADDR_RX_DIAG_BS_TM},
+ {0x8006, TB_ADDR_RX_DIAG_DFE_CTRL1},
+ {0x003f, TB_ADDR_RX_DIAG_ILL_IQE_TRIM4},
+ {0x543f, TB_ADDR_RX_DIAG_ILL_E_TRIM0},
+ {0x543f, TB_ADDR_RX_DIAG_ILL_IQ_TRIM0},
+ {0x0000, TB_ADDR_RX_DIAG_ILL_IQE_TRIM6},
+ {0x8000, TB_ADDR_RX_DIAG_RXFE_TM3},
+ {0x0003, TB_ADDR_RX_DIAG_RXFE_TM4},
+ {0x2408, TB_ADDR_RX_DIAG_LFPSDET_TUNE},
+ {0x05ca, TB_ADDR_RX_DIAG_DFE_CTRL3},
+ {0x0258, TB_ADDR_RX_DIAG_SC2C_DELAY},
+ {0x1fff, TB_ADDR_RX_REE_VGA_GAIN_NODFE},
+
+ {0x02c6, TB_ADDR_XCVR_PSM_CAL_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A0BYP_TMR},
+ {0x02c6, TB_ADDR_XCVR_PSM_A0IN_TMR},
+ {0x0010, TB_ADDR_XCVR_PSM_A1IN_TMR},
+ {0x0010, TB_ADDR_XCVR_PSM_A2IN_TMR},
+ {0x0010, TB_ADDR_XCVR_PSM_A3IN_TMR},
+ {0x0010, TB_ADDR_XCVR_PSM_A4IN_TMR},
+ {0x0010, TB_ADDR_XCVR_PSM_A5IN_TMR},
+
+ {0x0002, TB_ADDR_XCVR_PSM_A0OUT_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A1OUT_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A2OUT_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A3OUT_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A4OUT_TMR},
+ {0x0002, TB_ADDR_XCVR_PSM_A5OUT_TMR},
+ /* Change rx detect parameter */
+ {0x0960, TB_ADDR_TX_RCVDET_EN_TMR},
+ {0x01e0, TB_ADDR_TX_RCVDET_ST_TMR},
+ {0x0090, TB_ADDR_XCVR_DIAG_LANE_FCM_EN_MGN_TMR},
+};
+
+
+static int cdns_salvo_phy_power_on(struct phy *phy)
+{
+ struct cdns_salvo_phy *salvo_phy = phy_get_drvdata(phy);
+ struct cdns_salvo_data *data = salvo_phy->data;
+ int ret, i;
+ u16 value;
+
+ ret = clk_prepare_enable(salvo_phy->clk);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < data->init_sequence_length; i++) {
+ struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i;
+
+ cdns_salvo_write(salvo_phy, reg_pair->off, reg_pair->val);
+ }
+
+ /* RXDET_IN_P3_32KHZ, Receiver detect slow clock enable */
+ value = cdns_salvo_read(salvo_phy, TB_ADDR_TX_RCVDETSC_CTRL);
+ value |= RXDET_IN_P3_32KHZ;
+ cdns_salvo_write(salvo_phy, TB_ADDR_TX_RCVDETSC_CTRL,
+ RXDET_IN_P3_32KHZ);
+
+ udelay(10);
+
+ return ret;
+}
+
+static int cdns_salvo_phy_power_off(struct phy *phy)
+{
+ struct cdns_salvo_phy *salvo_phy = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(salvo_phy->clk);
+
+ return 0;
+}
+
+static struct phy_ops cdns_salvo_phy_ops = {
+ .power_on = cdns_salvo_phy_power_on,
+ .power_off = cdns_salvo_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int cdns_salvo_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct cdns_salvo_phy *salvo_phy;
+ struct resource *res;
+ const struct of_device_id *match;
+ struct cdns_salvo_data *data;
+
+ match = of_match_device(cdns_salvo_phy_of_match, dev);
+ if (!match)
+ return -EINVAL;
+
+ data = (struct cdns_salvo_data *)match->data;
+ salvo_phy = devm_kzalloc(dev, sizeof(*salvo_phy), GFP_KERNEL);
+ if (!salvo_phy)
+ return -ENOMEM;
+
+ salvo_phy->data = data;
+ salvo_phy->clk = devm_clk_get_optional(dev, "salvo_phy_clk");
+ if (IS_ERR(salvo_phy->clk))
+ return PTR_ERR(salvo_phy->clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ salvo_phy->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(salvo_phy->base))
+ return PTR_ERR(salvo_phy->base);
+
+ salvo_phy->phy = devm_phy_create(dev, NULL, &cdns_salvo_phy_ops);
+ if (IS_ERR(salvo_phy->phy))
+ return PTR_ERR(salvo_phy->phy);
+
+ phy_set_drvdata(salvo_phy->phy, salvo_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct cdns_salvo_data cdns_nxp_salvo_data = {
+ 2,
+ cdns_nxp_sequence_pair,
+ ARRAY_SIZE(cdns_nxp_sequence_pair),
+};
+
+static const struct of_device_id cdns_salvo_phy_of_match[] = {
+ {
+ .compatible = "nxp,salvo-phy",
+ .data = &cdns_nxp_salvo_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, cdns_salvo_phy_of_match);
+
+static struct platform_driver cdns_salvo_phy_driver = {
+ .probe = cdns_salvo_phy_probe,
+ .driver = {
+ .name = "cdns-salvo-phy",
+ .of_match_table = cdns_salvo_phy_of_match,
+ }
+};
+module_platform_driver(cdns_salvo_phy_driver);
+
+MODULE_AUTHOR("Peter Chen <peter.chen@xxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence SALVO PHY Driver");
--
2.17.1
