This series adds support for the "hardware message box" in sun8i, sun9i, and sun50i SoCs, used for communication with the ARISC management processor (the platform's equivalent of the ARM SCP). The end goal is to use the arm_scpi driver as a client, communicating with firmware running on the ARISC CPU. I have tested this driver with various firmware programs and mailbox clients on the A64, H5, and H6 SoCs (including specifically a patched version of the arm_scpi driver), and Ondrej Jirman has tested the driver on the A83T (using a similar patch to arm_scpi). This patch series includes just the driver and the device tree changes. Thanks, Samuel Changes from v6: - Rebased on tag v5.6-rc2 - Collected Acked-by/Reviewed-by tags - Dropped "FIFO full" check in sun6i_msgbox_send_data() Changes from v5: - Rebased on tag sunxi-dt-for-5.5-2 - Dropped unnecessary/unrelated patches - Addressed Maxime's dt-binding comments - Used devm_reset_control_get_exclusive Changes from v4: - Rebased on sunxi-next - Dropped AR100 clock patch, as it was controversial and unnecessary - Renamed sunxi-msgbox to sun6i-msgbox and sun6i-a31-msgbox - Added comments about not asserting the reset line - Dropped A80 DTS changes as they were untested - Added Ondrej's Tested-by for A83T - Dropped the demo; replaced with a real arm_scpi fix Changes from v3: - Rebased on sunxi-next - Added Rob's Reviewed-by for patch 3 - Fixed a crash when receiving a message on a disabled channel - Cleaned up some comments/formatting in the driver - Fixed #mbox-cells in sunxi-h3-h5.dtsi (patch 7) - Removed the irqchip example (no longer relevant to the fw design) - Added a demo/example client that uses the driver and a toy firmware Changes from v2: - Merge patches 1-3 - Add a comment in the code explaining the CLK_IS_CRITICAL usage - Add a patch to mark the AR100 clocks as critical - Use YAML for the device tree binding - Include a not-for-merge example usage of the mailbox Changes from v1: - Marked message box clocks as critical instead of hacks in the driver - 8 unidirectional channels instead of 4 bidirectional pairs - Use per-SoC compatible strings and an A31 fallback compatible - Dropped the mailbox framework patch - Include DT patches for SoCs that document the message box Samuel Holland (6): dt-bindings: mailbox: Add a binding for the sun6i msgbox mailbox: sun6i-msgbox: Add a new mailbox driver ARM: dts: sunxi: a83t: Add msgbox node ARM: dts: sunxi: h3/h5: Add msgbox node arm64: dts: allwinner: a64: Add msgbox node arm64: dts: allwinner: h6: Add msgbox node .../mailbox/allwinner,sun6i-a31-msgbox.yaml | 80 +++++ arch/arm/boot/dts/sun8i-a83t.dtsi | 10 + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 + drivers/mailbox/Kconfig | 9 + drivers/mailbox/Makefile | 2 + drivers/mailbox/sun6i-msgbox.c | 326 ++++++++++++++++++ 8 files changed, 457 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml create mode 100644 drivers/mailbox/sun6i-msgbox.c -- 2.24.1
