Re: [linux-sunxi] [PATCH 2/4] ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage

[Chen-Yu Tsai <wens@xxxxxxxx>]

On Sun, Feb 23, 2020 at 6:32 AM Ondrej Jirman <megous@xxxxxxxxxx> wrote:
>
> Lowering the voltage solves the quick image degradation over time
> (minutes), that was probably caused by overheating.
>
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>

Makes sense. A lot of camera sensors run their digital parts off 1.8V.
This one is no different.

Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>

The whole CSI stuff isn't enabled in the device tree yet though, and
there are a lot of regulators with CSI in their names. Will this get
worked on?

ChenYu

> ---
>  arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index ee5ce3556b2ad..ae1fd2ee3bcce 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -371,8 +371,8 @@ &reg_dldo2 {
>  };
>
>  &reg_dldo3 {
> -       regulator-min-microvolt = <2800000>;
> -       regulator-max-microvolt = <2800000>;
> +       regulator-min-microvolt = <1800000>;
> +       regulator-max-microvolt = <1800000>;
>         regulator-name = "vdd-csi";
>  };
>
> --
> 2.25.1
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200222223154.221632-3-megous%40megous.com.